* Bram Havers <Bram_Havers at nl.ibm.com> [2003-08-18 18:14:14 +0200]: > Hi, > I've installed lm_sensors and i2c on my Via Epia ME6000 with Red Hat 9. > When i run sensors-detect it ends with a segmentation fault after which > only a reboot helps to kill the processes > Below i've posted what appears on the console, dmseg and lsmod. > Hope you can help. Thanks. <snip> > ----------dmesg ---- > via82cxxx: board #1 at 0xE400, IRQ 10 > i2c-core.o: i2c core module version 2.8.0 (20030714) > i2c-viapro.o version 2.6.5 (20020915) > i2c-viapro.o: Found Via VT8233A/8235 device > i2c-viapro.o: Via Pro SMBus detected and initialized > i2c-dev.o: i2c /dev entries driver module version 2.8.0 (20030714) > i2c-dev.o: Registered 's Via Pro adapter at 0500' as minor 0 <snip> You have version 2.8.0 of I2C but only 2.6.5 of sensors, not sure how. Make sure to remove the sensors RH package, then rebuild and reinstall from the 2.8.0 source - first i2c, then lm_sensors2. OT: How is the Linux support for the rest of that board? Regards, -- Mark M. Hoffman mhoffman at lightlink.com
