I am having no luck in compiling the modules. Here is what I have been selecting. <M> I2C support <M> I2C bit-banging interfaces (NEW) <M> I2C PCF 8584 interfaces (NEW) [*] I2C mainboard interfaces (NEW) <M> Pseudo ISA adapter (for some hardware sensors) (NEW) <M> I2C device interface (NEW) <M> I2C /proc interface (required for hardware sensors) (NEW) <M> National Semiconductor LM75 and compatibles (NEW) <M> National Semiconductor LM78 (NEW) <M> National Semiconductor LM80 (NEW) <M> National Semiconductor LM85, Analog Devices ADM1027 (NEW) <M> National Semiconductor LM87 (NEW) <M> National Semiconductor LM92 (NEW) [*] Other I2C devices (NEW) <M> EEprom (DIMM) reader (NEW) Here is the last error message. i2c-isa.c:46: error: unknown field `owner' specified in initializer i2c-isa.c:46: warning: missing braces around initializer i2c-isa.c:46: warning: (near initialization for `isa_adapter.name') i2c-isa.c:46: warning: initialization makes integer from pointer without a cast i2c-isa.c:46: error: initializer element is not computable at load time i2c-isa.c:46: error: (near initialization for `isa_adapter.name[0]') i2c-isa.c:47: error: initializer element is not constant i2c-isa.c:47: error: (near initialization for `isa_adapter.name') Here is an output lspci 00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02) 00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) 00:0f.0 Non-VGA unclassified device: Intel Corp. 82375EB (rev 15) 00:10.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) 00:11.0 USB Controller: OPTi Inc. 82C861 (rev 10) 00:13.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 01:08.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) 01:0a.0 SCSI storage controller: Adaptec AIC-7880U 01:0b.0 SCSI storage controller: Adaptec AIC-7860 (rev 01) 01:0d.0 Unknown mass storage controller: American Megatrends Inc. MegaRAID 428 Ultra RAID Controller (rev 03) 02:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 21) 02:08.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 21) ----- Original Message ----- From: "Jean Delvare" <khali at linux-fr.org> To: "Jim Gifford" <jim at jg555.com> Cc: <sensors at Stimpy.netroedge.com> Sent: Sunday, July 13, 2003 9:41 AM Subject: Re: Dell Poweredge > > > Dead as in needing a bios flash, which means it can be made to work. > > OK, it's only wounded then, not dead ;) > > > I send a link, that I found, that says that sensors don't work > > http://lists.us.dell.com/pipermail/linux-aacraid-devel/2001-February/000019.html > > Well, the message is 25 months old. We would need recent information. > What I would suggest is that you give a try to i2c and lm_sensors CVS > and tell us how it works. We can't do anything before you do so and > report how it went. > > -- > Jean Delvare > http://www.ensicaen.ismra.fr/~delvare/ >
