it's unlikely you have a lm80. 2.6.3 is very old. Get release 2.7.0 and try again. Nejc Buzinel wrote: > > Hello. I'm writing you because i get the wrong values of cputemp and > fan speed when running 'sensors'. I have MSI K7T Turbo motherboard > with VIA VT8363 Chipset, AMD Thunderbird processor. > The lm_sensors is version 2.6.3-5 and i'm running linux 2.4.18. > > I inserted all the modules with help of 'sensors-detect', and when running > 'sensors' it comes this out: > > lm80-i2c-0-2d > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > +5V: +5.05 V (min = +4.74 V, max = +6.71 V) ALARM > VTT: +1.52 V (min = +1.90 V, max = +2.10 V) ALARM > +3.3V: +2.54 V (min = +3.13 V, max = +3.46 V) ALARM > +Vcore: +0.27 V (min = +1.80 V, max = +1.99 V) ALARM > +12V: +12.95 V (min = +11.37 V, max = +12.57 V) ALARM > -12V: -12.51 V (min = -12.73 V, max = -11.53 V) > -5V: -4.59 V (min = -5.34 V, max = -4.82 V) > fan1: 10546 RPM (min = 6000 RPM, div = 1) > fan2: -1 RPM (min = 6000 RPM, div = 1) > temp: -128.00 0C (hot:limit = +60C, hysteresis = +50C) ALARM > (os: limit = +60C, hysteresis = +50C) ALARM > alarms: Board temperature input (LM75) ALARM > > eeprom-i2c-0-51 > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > Memory type: SDRAM DIMM SPD > SDRAM Size (MB): 128 > > Here is also an output of 'lspci': > > 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev > 03) > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] > 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] > (rev 40) > 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) > 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) > 00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) > 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] > (rev 40) > 00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio > Controller (rev 50) > 00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev > 08) > 00:0a.1 Input device controller: Creative Labs SB Live! (rev 08) > 00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] > (rev 34) > 01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) > (rev a1) > > If it is possible, i would be really grateful if you can solve my problem. > > Thanx for now and keep the good work! > > Greetings > > Nejc (Nejc.Buzinel at guest.arnes.si)
