Hello. I'm writing you because i get the wrong values of cputemp and
fan speed when running 'sensors'. I have MSI K7T Turbo motherboard
with VIA VT8363 Chipset, AMD Thunderbird processor.
The lm_sensors is version 2.6.3-5 and i'm running linux 2.4.18.
I inserted all the modules with help of 'sensors-detect', and when running
'sensors' it comes this out:
lm80-i2c-0-2d
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
+5V: +5.05 V (min = +4.74 V, max = +6.71 V) ALARM
VTT: +1.52 V (min = +1.90 V, max = +2.10 V) ALARM
+3.3V: +2.54 V (min = +3.13 V, max = +3.46 V) ALARM
+Vcore: +0.27 V (min = +1.80 V, max = +1.99 V) ALARM
+12V: +12.95 V (min = +11.37 V, max = +12.57 V) ALARM
-12V: -12.51 V (min = -12.73 V, max = -11.53 V)
-5V: -4.59 V (min = -5.34 V, max = -4.82 V)
fan1: 10546 RPM (min = 6000 RPM, div = 1)
fan2: -1 RPM (min = 6000 RPM, div = 1)
temp: -128.00 0C (hot:limit = +60C, hysteresis = +50C) ALARM
(os: limit = +60C, hysteresis = +50C) ALARM
alarms: Board temperature input (LM75) ALARM
eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
Here is also an output of 'lspci':
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 50)
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
08)
00:0a.1 Input device controller: Creative Labs SB Live! (rev 08)
00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 34)
01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX)
(rev a1)
If it is possible, i would be really grateful if you can solve my problem.
Thanx for now and keep the good work!
Greetings
Nejc (Nejc.Buzinel at guest.arnes.si)
