On Tue, 2003-06-03 at 21:43, Philip Pokorny wrote: > Martin Schlemmer wrote: > > On Mon, 2003-06-02 at 19:20, Greg KH wrote: > > > > Hiya Greg > > > > While sorda on the topic ... since I did the w83781d driver some time > > ago, I changed boards for a P4C800 (Intel 875 chipset), that have a > > ICH5 southbridge, and not a ICH4 one .... I tried to add the ID's > > to the i810 driver, and although it does load (even without the > > ID's added), the I2C bus/sensor does not show in /sys. The w83781d > > driver also load fine btw. > > My system (SuperMicro) with an '875 and ICH5 reports the ICH5 as an > '801EB' which means you should be using the i2c-i801 driver not i2c-i810... > Right ... at work, so could not verify. > I'm also betting that you need to set 'isich4' to true in the case of > the ich5 as well... > > Try the attached patch... NOTE: I have *not* consulted the Intel DOC's > on the ICH4 and ICH5 to see if the register interface has changed in > other interesting ways... > Will let you know, thanks. Regards, -- Martin Schlemmer
