Martin Schlemmer wrote: > On Mon, 2003-06-02 at 19:20, Greg KH wrote: > > Hiya Greg > > While sorda on the topic ... since I did the w83781d driver some time > ago, I changed boards for a P4C800 (Intel 875 chipset), that have a > ICH5 southbridge, and not a ICH4 one .... I tried to add the ID's > to the i810 driver, and although it does load (even without the > ID's added), the I2C bus/sensor does not show in /sys. The w83781d > driver also load fine btw. My system (SuperMicro) with an '875 and ICH5 reports the ICH5 as an '801EB' which means you should be using the i2c-i801 driver not i2c-i810... I'm also betting that you need to set 'isich4' to true in the case of the ich5 as well... Try the attached patch... NOTE: I have *not* consulted the Intel DOC's on the ICH4 and ICH5 to see if the register interface has changed in other interesting ways... > Any ideas ? Anybody working on 875 support that I can help test ? Unfortuntately, the SuperMicro has a Winbond '627HF chip on the ISA bus and no other SMBus sensors, so the i2c-i801 support didn't help me much. :v) -- Philip Pokorny, Director of Engineering Tel: 415-358-2635 Fax: 415-358-2646 Toll Free: 888-PENGUIN PENGUIN COMPUTING, INC. www.penguincomputing.com -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: lm_sensors-2.7.0-ich5-1.patch Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030603/4b5bc410/attachment.pl
