You have HW_B ID 0x18. Vergonet, Henk wrote: > OK I will change this. > Waiting for rain... > > Cheers, > > Henk > > > > -----Original Message----- > From: Mark Studebaker [mailto:mds at paradyne.com] > Sent: Friday, May 30, 2003 3:43 PM > To: Vergonet Henk > Cc: 'sensors at stimpy.netroedge.com' > Subject: Re: New i2c bus driver for S3/VIA chipsets > > > you want a HW_B number if it is a "bit banger" adapter which uses > the i2c_algo_bit algorithm. > > If the S3VIA is similar to the i2c-i810 driver then that's what you want. > > "Vergonet, Henk" wrote: > >>Hi sensors people, >> >>I will send in a "proper" and tested patch for 2.5, will need some rainy >>weather;). >>For now here's the bus driver which was developed on top of the 2.7.0 >>release. >> >>Mark, I am not really sure I want a HW_B number, I just wanted to fill in >>something >>in the id field of the adapter struct. If this needs to be something else >>please let me know. >> >>Cheers, >> >>Henk Vergonet >> > > > > N.B.: op (de inhoud van) deze e-mail is een DISCLAIMER met belangrijke > VOORBEHOUDEN van toepassing: zie http://www.t-mobile.nl/disclaimer > > This e-mail and its contents are subject to a DISCLAIMER with important > RESERVATIONS: see http://www.t-mobile.nl/disclaimer > >
