OK I will change this. Waiting for rain... Cheers, Henk -----Original Message----- From: Mark Studebaker [mailto:mds at paradyne.com] Sent: Friday, May 30, 2003 3:43 PM To: Vergonet Henk Cc: 'sensors at stimpy.netroedge.com' Subject: Re: New i2c bus driver for S3/VIA chipsets you want a HW_B number if it is a "bit banger" adapter which uses the i2c_algo_bit algorithm. If the S3VIA is similar to the i2c-i810 driver then that's what you want. "Vergonet, Henk" wrote: > > Hi sensors people, > > I will send in a "proper" and tested patch for 2.5, will need some rainy > weather;). > For now here's the bus driver which was developed on top of the 2.7.0 > release. > > Mark, I am not really sure I want a HW_B number, I just wanted to fill in > something > in the id field of the adapter struct. If this needs to be something else > please let me know. > > Cheers, > > Henk Vergonet > N.B.: op (de inhoud van) deze e-mail is een DISCLAIMER met belangrijke VOORBEHOUDEN van toepassing: zie http://www.t-mobile.nl/disclaimer This e-mail and its contents are subject to a DISCLAIMER with important RESERVATIONS: see http://www.t-mobile.nl/disclaimer
