figure out what chips you have on your board, make sure you have the latest release, see FAQ. John Wells wrote: > > Hi guys. > > I'm new to lm_sensors, but got it installed yesterday on one of my > systems. The system contains an Gigabyte GA-7VRX, which in turn has a > Via KT333 and a VT8233A (among other chips). > > Anyway, the modules the install told me to try were: > i2c-viapro > adm1021 > eeprom > > However, this was after quite a bit of mucking around with a few install > sequences on my part, and *before* I read the online documentation (I > know, I know ;-)). > > When I run sensors now, I get the following output: > > max1617-i2c-0-4c > Adapter: SMBus Via Pro adapter at 0400 > Algorithm: Non-I2C SMBus adapter > temp: +41?C (min = +20?C, max = +60?C) > remote_temp: > +42?C (min = +20?C, max = +60?C) > > eeprom-i2c-0-50 > Adapter: SMBus Via Pro adapter at 0400 > Algorithm: Non-I2C SMBus adapter > Memory type: DDR SDRAM DIMM SPD > SDRAM Size (MB): 512 > > That's it. Temperature and memory size. > > Does anyone have experience with this board or the VT8233A(CE)? Is this > all the info I can get, or am I missing something here. > > Any pointers in the right direction will be greatly appreciated. > > Thanks! > John
