sorry, we don't know what is inside your laptop. You probably won't get any luck with asking Asus either. valvoline wrote: > > hi folks!, > > recently i bought a new asus laptop (L3C series), with P4 and i845 embedded, > i've tried to install lm_sensor (2.6.4), but without success...my device seems > to be not installed or not found...i've tried a manual hacking for the p4b series > motherboard, but without success...(probable, the device lists in notebook is different). > > waiting for a response.... > > following are some screen dump of lspci and pcitweak: > > >lspci -vvvv > > 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04) > Subsystem: Asustek Computer, Inc.: Unknown device 1626 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [e4] #09 [d104] > Capabilities: [a0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 > Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1 > > 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: ef000000-efefffff > Prefetchable memory behind bridge: eff00000-f7ffffff > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > > 00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) > Subsystem: Asustek Computer, Inc.: Unknown device 1628 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at b800 [size=32] > > 00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) > Subsystem: Asustek Computer, Inc.: Unknown device 1628 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 9 > Region 4: I/O ports at b400 [size=32] > > 00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI]) > Subsystem: Asustek Computer, Inc.: Unknown device 1628 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 9 > Region 4: I/O ports at b000 [size=32] > > 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: ee000000-eeffffff > Prefetchable memory behind bridge: eff00000-efefffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP]) > Subsystem: Asustek Computer, Inc.: Unknown device 1628 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at 9800 [size=8] > Region 1: I/O ports at 9400 [size=4] > Region 2: I/O ports at 9000 [size=8] > Region 3: I/O ports at 8800 [size=4] > Region 4: I/O ports at 8400 [size=16] > Region 5: Memory at ed800000 (32-bit, non-prefetchable) [size=1K] > > 00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02) > Subsystem: Asustek Computer, Inc.: Unknown device 1583 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 9 > Region 0: I/O ports at e000 [size=256] > Region 1: I/O ports at e100 [size=64] > > 00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02) (prog-if 00 [Generic]) > Subsystem: Asustek Computer, Inc.: Unknown device 1496 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 9 > Region 0: I/O ports at e200 [size=256] > Region 1: I/O ports at e300 [size=128] > > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW (prog-if 00 [VGA]) > Subsystem: Asustek Computer, Inc.: Unknown device 1622 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (2000ns min), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at d800 [size=256] > Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at effe0000 [disabled] [size=128K] > Capabilities: [58] AGP version 2.0 > Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4 > Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1 > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) > Subsystem: Asustek Computer, Inc.: Unknown device 1045 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at a800 [size=256] > Region 1: Memory at ee800000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > > 02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) > Subsystem: Asustek Computer, Inc.: Unknown device 1624 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at ee001000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=02, subordinate=03, sec-latency=176 > Memory window 0: ee400000-ee7ff000 (prefetchable) > Memory window 1: eec00000-eefff000 > I/O window 0: 0000a000-0000a0ff > I/O window 1: 0000a400-0000a4ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > > 02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) > Subsystem: Asustek Computer, Inc.: Unknown device 1624 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 > Interrupt: pin B routed to IRQ 9 > Region 0: Memory at ee002000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=04, subordinate=07, sec-latency=176 > Memory window 0: 00000000-00000000 (prefetchable) > Memory window 1: 00000000-00000000 > I/O window 0: 0000ac00-0000acff > I/O window 1: 00000000-00000003 > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > > 02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (prog-if 10 [OHCI]) > Subsystem: Asustek Computer, Inc.: Unknown device 1627 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (500ns min, 1000ns max) > Interrupt: pin C routed to IRQ 9 > Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=2 PME- > > > pcitweak -l > > PCI: Probing config type using method 1 > PCI: Config type is 1 > PCI: PCI scan (all values are in hex) > PCI: 00:00:0: chip 8086,1a30 card 1043,1626 rev 04 class 06,00,00 hdr 00 > PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01 > PCI: 00:1d:0: chip 8086,2482 card 1043,1628 rev 02 class 0c,03,00 hdr 80 > PCI: 00:1d:1: chip 8086,2484 card 1043,1628 rev 02 class 0c,03,00 hdr 00 > PCI: 00:1d:2: chip 8086,2487 card 1043,1628 rev 02 class 0c,03,00 hdr 00 > PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01 > PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80 > PCI: 00:1f:1: chip 8086,248a card 1043,1628 rev 02 class 01,01,8a hdr 00 > PCI: 00:1f:5: chip 8086,2485 card 1043,1583 rev 02 class 04,01,00 hdr 00 > PCI: 00:1f:6: chip 8086,2486 card 1043,1496 rev 02 class 07,03,00 hdr 00 > PCI: 01:00:0: chip 1002,4c57 card 1043,1622 rev 00 class 03,00,00 hdr 00 > PCI: 02:05:0: chip 10ec,8139 card 1043,1045 rev 10 class 02,00,00 hdr 00 > PCI: 02:07:0: chip 1180,0476 card a000,0000 rev a8 class 06,07,00 hdr 82 > PCI: 02:07:1: chip 1180,0476 card ac00,0000 rev a8 class 06,07,00 hdr 82 > PCI: 02:07:2: chip 1180,0552 card 1043,1627 rev 00 class 0c,00,10 hdr 80 > PCI: End of PCI scan > > -- > [ valvoline :: VRL Team :: s0ftpj :: freaknet Medialab :: GPG key available ] > [ key fingerprint :: - :: B7E2 48BC 705F AE8F 9ABE E422 076A 2561 1D67 B4DD ] > [ GPG key available on keyserver :: pgp.mit.edu :: with keyID :: 1D67B4DD :: ]
