new via chips supported in CVS. Ronald Knjzek wrote: > > Hi! > > Having problems with my A7V333. > Looks like no bus and no sensors are dedected. > Chipset should be supported, but lspci shows different > chips as in manual or on the mobo! > > ----------------------------------------------------------------- > > ### sensors-detect > > [...] > Probing for PCI bus adapters... > Sorry, no PCI bus adapters found. > [...] > To continue, we need module `i2c-dev' to be loaded. > If it is built-in into your kernel, you can safely skip this. > i2c-dev is already loaded. > [...] > this. Do you want to scan the ISA bus? (YES/no): > Probing for `National Semiconductor LM78' > Trying address 0x0290... Failed! > Probing for `National Semiconductor LM78-J' > Trying address 0x0290... Failed! > Probing for `National Semiconductor LM79' > Trying address 0x0290... Failed! > Probing for `Winbond W83781D' > Trying address 0x0290... Failed! > Probing for `Winbond W83782D' > Trying address 0x0290... Failed! > Probing for `Winbond W83627HF' > Trying address 0x0290... Failed! > Probing for `Winbond W83697HF' > Trying address 0x0290... Failed! > Probing for `Silicon Integrated Systems SIS5595' > Trying general detect... Failed! > Probing for `VIA Technologies VT 82C686 Integrated Sensors' > Trying general detect... Failed! > Probing for `ITE IT8705F / IT8712F / SiS 950' > Trying address 0x0290... Failed! > [...] > listed here to it: > > #----cut here---- > # I2C adapter drivers > # I2C chip drivers > #----cut here---- > > Then, run /etc/init.d/modutils > > To make the sensors modules behave correctly, add these lines to > /etc/modutils/local and run update-modules: > > #----cut here---- > # I2C module options > alias char-major-89 i2c-dev > #----cut here---- > > ----------------------------------------------------------------- > > ### lsmod > Module Size Used by Not tainted > i2c-philips-par 2088 0 (unused) > i2c-algo-bit 7596 0 [i2c-philips-par] > i2c-proc 6368 0 > i2c-dev 3840 0 > i2c-isa 1220 0 > i2c-core 13192 0 [i2c-algo-bit i2c-proc i2c-dev > i2c-isa] > ipt_state 576 2 (autoclean) > iptable_mangle 2144 0 (autoclean) (unused) > > --------------------------------------------------------------- > > ### modprobe i2c-viapro > /lib/modules/2.4.18/misc/i2c-viapro.o: init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.18/misc/i2c-viapro.o: insmod > /lib/modules/2.4.18/misc/i2c-viapro.o failed > /lib/modules/2.4.18/misc/i2c-viapro.o: insmod i2c-viapro failed > > ---------------------------------------------------------------- > > ### lspci -n > 00:00.0 Class 0600: 1106:3099 > 00:01.0 Class 0604: 1106:b099 > 00:05.0 Class 0401: 13f6:0111 (rev 10) > 00:09.0 Class 0c03: 1106:3038 (rev 50) > 00:09.1 Class 0c03: 1106:3038 (rev 50) > 00:09.2 Class 0c03: 1106:3104 (rev 51) > 00:0d.0 Class 0200: 10ec:8029 > 00:0e.0 Class 0200: 10b7:9004 (rev 04) > 00:10.0 Class 0100: 9004:5078 (rev 03) > 00:11.0 Class 0601: 1106:3147 > 00:11.1 Class 0101: 1106:0571 (rev 06) > 00:11.2 Class 0c03: 1106:3038 (rev 23) > 00:11.3 Class 0c03: 1106:3038 (rev 23) > 01:00.0 Class 0300: 10de:0110 (rev b2) > > ### lspci > 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266] > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] > 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev > 10) > 00:09.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) > 00:09.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) > 00:09.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev > 51) > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8029(AS) > 00:0e.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL > TPO] (rev 04) > 00:10.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) > 00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147 > 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) > 00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) > 00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) > 01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) > (rev b2) > > ---------------------------------------------------------------------- > > ### ./i2cdetect > Error: No i2c-bus specified! > Syntax: i2cdetect I2CBUS > I2CBUS is an integer > Installed I2C busses: > i2c-0 dummy ISA main adapter > ISA bus algorithm > > ### ./i2cdetect 0 > Error: Can't use SMBus Quick Write command on this bus (ISA bus?) > > ------------------------------------------------------------------------ > > ### isadump 0x295 0x296 > WARNING! Running this program can cause system crashes, data loss and > worse! > I will probe address register 0x0295 and data register 0x0296. > You have five seconds to reconsider and press CTRL-C! > > 0 1 2 3 4 5 6 7 8 9 a b c d e f > 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ------------------------------------------------------------------- > > mobo: ASUS A7V333 > VIA KT333 North Brige > VIA VT8233A South Brige > > kernel 2.4.18 > > i2c 2.6.3 > > sensors 2.6.3 > > -------------------------------------------------------------------- > > I hope that is all the info you need! > Any help is appreciated. > > Ron
