Hi!
Having problems with my A7V333.
Looks like no bus and no sensors are dedected.
Chipset should be supported, but lspci shows different
chips as in manual or on the mobo!
-----------------------------------------------------------------
### sensors-detect
[...]
Probing for PCI bus adapters...
Sorry, no PCI bus adapters found.
[...]
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.
[...]
this. Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT 82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
Trying address 0x0290... Failed!
[...]
listed here to it:
#----cut here----
# I2C adapter drivers
# I2C chip drivers
#----cut here----
Then, run /etc/init.d/modutils
To make the sensors modules behave correctly, add these lines to
/etc/modutils/local and run update-modules:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
-----------------------------------------------------------------
### lsmod
Module Size Used by Not tainted
i2c-philips-par 2088 0 (unused)
i2c-algo-bit 7596 0 [i2c-philips-par]
i2c-proc 6368 0
i2c-dev 3840 0
i2c-isa 1220 0
i2c-core 13192 0 [i2c-algo-bit i2c-proc i2c-dev
i2c-isa]
ipt_state 576 2 (autoclean)
iptable_mangle 2144 0 (autoclean) (unused)
---------------------------------------------------------------
### modprobe i2c-viapro
/lib/modules/2.4.18/misc/i2c-viapro.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.18/misc/i2c-viapro.o: insmod
/lib/modules/2.4.18/misc/i2c-viapro.o failed
/lib/modules/2.4.18/misc/i2c-viapro.o: insmod i2c-viapro failed
----------------------------------------------------------------
### lspci -n
00:00.0 Class 0600: 1106:3099
00:01.0 Class 0604: 1106:b099
00:05.0 Class 0401: 13f6:0111 (rev 10)
00:09.0 Class 0c03: 1106:3038 (rev 50)
00:09.1 Class 0c03: 1106:3038 (rev 50)
00:09.2 Class 0c03: 1106:3104 (rev 51)
00:0d.0 Class 0200: 10ec:8029
00:0e.0 Class 0200: 10b7:9004 (rev 04)
00:10.0 Class 0100: 9004:5078 (rev 03)
00:11.0 Class 0601: 1106:3147
00:11.1 Class 0101: 1106:0571 (rev 06)
00:11.2 Class 0c03: 1106:3038 (rev 23)
00:11.3 Class 0c03: 1106:3038 (rev 23)
01:00.0 Class 0300: 10de:0110 (rev b2)
### lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP]
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
00:09.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50)
00:09.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50)
00:09.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev
51)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8029(AS)
00:0e.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL
TPO] (rev 04)
00:10.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23)
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23)
01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX)
(rev b2)
----------------------------------------------------------------------
### ./i2cdetect
Error: No i2c-bus specified!
Syntax: i2cdetect I2CBUS
I2CBUS is an integer
Installed I2C busses:
i2c-0 dummy ISA main adapter
ISA bus algorithm
### ./i2cdetect 0
Error: Can't use SMBus Quick Write command on this bus (ISA bus?)
------------------------------------------------------------------------
### isadump 0x295 0x296
WARNING! Running this program can cause system crashes, data loss and
worse!
I will probe address register 0x0295 and data register 0x0296.
You have five seconds to reconsider and press CTRL-C!
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-------------------------------------------------------------------
mobo: ASUS A7V333
VIA KT333 North Brige
VIA VT8233A South Brige
kernel 2.4.18
i2c 2.6.3
sensors 2.6.3
--------------------------------------------------------------------
I hope that is all the info you need!
Any help is appreciated.
Ron
