the script found two possibilities at 0x49 with the same confidence. Unfortunately the script doesn't tell you that, it just recommends one of the two (the first one it found I guess). Try modprobing lm75, not pcf8591. I guess you did that. Of course you may not really have a lm75 so you may not get good results. We already have a Asus 'Mozart' on our new drivers page, I'll add the "bach". Presumably it has your temps, fans, voltages, etc. We're unlikely to ever get a datasheet on either. Sorry. Tobias Edler wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi ! > I have a Asus A7v333 mainboard, and cant get all the information, the > sensor should deliver. The chip is labeld ASB100 Bach, the manual calls > it "ASUS Asic with thermal controller". Here's the result from > sensors-detect : > > Driver `eeprom' (should be inserted): > Detects correctly: > * Bus `bt848 #0' (Bit-shift algorithm) > Busdriver `UNKNOWN', I2C address 0x50 > Chip `Serial EEPROM (PC-100 DIMM)' (confidence: 1) > > Driver `pcf8591' (should be inserted but causes problems): > Detects correctly: > * Bus `SMBus Via Pro adapter at e800' (Non-I2C SMBus adapter) > Busdriver `i2c-viapro', I2C address 0x48 > Chip `Philips Semiconductors PCF8591' (confidence: 1) > Misdetects: > * Bus `SMBus Via Pro adapter at e800' (Non-I2C SMBus adapter) > Busdriver `i2c-viapro', I2C address 0x49 > Chip `Philips Semiconductors PCF8591' (confidence: 1) > > Driver `lm75' (should be inserted): > Detects correctly: > * Bus `SMBus Via Pro adapter at e800' (Non-I2C SMBus adapter) > Busdriver `i2c-viapro', I2C address 0x49 > Chip `National Semiconductor LM75' (confidence: 3) > > Driver `ds1621' (may not be inserted): > Misdetects: > * Bus `SMBus Via Pro adapter at e800' (Non-I2C SMBus adapter) > Busdriver `i2c-viapro', I2C address 0x49 > Chip `Dallas Semiconductor DS1621' (confidence: 3) > #----cut here---- > # I2C adapter drivers > # modprobe unknown adapter bt848 #0 using Bit-shift algorithm > # modprobe unknown adapter bt848 #0 using Bit-shift algorithm > modprobe i2c-viapro > # I2C chip drivers > modprobe eeprom > modprobe pcf8591 > modprobe lm75 > #----cut here---- > > To make the sensors modules behave correctly, add these lines to either > /etc/modules.conf or /etc/conf.modules: > > #----cut here---- > # I2C module options > alias char-major-89 i2c-dev > options pcf8591 ignore=1,0x49 > #----cut here---- > > What exactly does "may not be inserted" mean ? Won't work ? might cause > problems ? will blow up my computer ? > > with lm75, the temperature is disoplayed correctly, but not voltages, > fan speeds, MB temp. > > Can any of you give me a hint ? > > Regards > - -- > ________ > \ | GPG (PGP) Key: www.stud.uni-goettingen.de/~s242275/pgpkey.pub > \ |-- Jabber-ID at a-message.de: te_linuxguru > \|____ ICQ: 124557012 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.0.7 (GNU/Linux) > > iD8DBQE9CdXCKpMiVYRJv9YRAt+IAJ9/bINclYVvLiGcUoTwIZZj36b3VgCfRl7Q > hh06l1CK+xZ+9OS+qig8ds4= > =Wdo2 > -----END PGP SIGNATURE-----
