Latest datasheets would be _greatly_ appreciated. As many chips are quite similar, there often is not much programming, we just need the datasheets. We also need a 686B datasheet. Of course if you are willing to donate motherboards please let us know, that will help us quite a bit. We do support the 8231, 8233, and 8233A i2c drivers, but not their integrated sensors (if any). The latest information on driver support is here http://www2.lm-sensors.nu/~lm78/newdrivers.html thanks very much for your interest. mds phil at netroedge.com wrote: > > Hi, thanks for the email. Right now, I think we support the > VT8233(A), but not yet the VT8231 nor the VT8235. We could use your > help to get drivers written. If you can, we'd appreciate you > submitting bus drivers (see kernel/busses/i2c-* for examples) to > integrate into the project. We might also be able to find a developer > to help out, but we seem to be a bit thin with programmers right now. > > Thanks! > > Phil > > On Tue, May 21, 2002 at 05:50:03PM +0800, JH Tseng wrote: > > > > Hi Sir, > > > > I am a software engineer in VIA Tech Inc. According to the status report in > > your web site, we find that there are not the sensor chip drivers for latest > > VIA south bridges such as the VT8231, VT8233(A) and VT8235. Therefore, I > > need your help or I can provide some HWs and information to you to > > co-develope/co-test the hardware monitor based on the VIA platform. I deeply > > appreciate you very much if you have any input. > > > > Best regards > > > > JH > > -- > Philip Edelbrock -- IS Manager -- Edge Design, Corvallis, OR > phil at netroedge.com -- http://www.netroedge.com/~phil > PGP F16: 01 D2 FD 01 B5 46 F4 F0 3A 8B 9D 7E 14 7F FB 7A
