On Fri, 26 Apr 2002, Norbert Tretkowski wrote: > Hi, > > I've tried to load the i2c-viapro module. > > ,---- > | Apr 26 11:33:39 rollcage kernel: i2c-core.o: i2c core module version 2.6.3 (20020322) > | Apr 26 11:33:39 rollcage kernel: i2c-viapro.o version 2.6.3 (20020322) > | Apr 26 11:33:39 rollcage kernel: i2c-viapro.o: Can't detect vt82c596 or compatible device, module not inserted. > `---- > > The Mainboard is a Asus A7V266-EX with Via VT8233A Chipset. VIA may have changed the PCI Device ID for the -A release of the chipset. I think VT8233 support (since 2.6.2) was invented by simpling adding the Device ID on the list of probe device IDs in i2c-viapro.c source, you could try the same with VT8233A. > ,----[ lspci ] > | 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3099 > | 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b099 > | 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) > | 00:0d.0 Non-VGA unclassified device: Symbios Logic Inc. (formerly NCR) 53c810 (rev 01) > | 00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) > | 00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147 > | 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) > | 00:11.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 23) > | 00:11.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 23) > | 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 85) > `---- > > Is this a hardware problem oder a problem with i2c? I think an "ACPI" device should appear as 00:11.x in the lspci listing above, try to enable it manually in BIOS. Also, a numerical listing with "lspci -n" might help us forwards. I am no longer actively involved in the development process, so better contact the sensors list directly (see Cc:). Also, on the site's support subpage you may find advice concerning particular motheboards. -- Ky?sti M?lkki kmalkki at cc.hut.fi
