As far as we know the OSB4 support works fine, so the problem is presumably with chips on the SMBus that we don't support? It's not something on the ISA/PCI bus? Them telling you what the chips are shouldn't require an NDA... or you can look at the board... Or do you already know it is some proprietary sensor chip? Of course we would welcome a donation... Matthew Brichacek wrote: > > Hello, > I have recently tried to get my serverworks osb4 mb to register your > drivers. I was able to get the PIIx4 driver to load and recognize the > SMBus, however no chips are recognized. I was able to get ServerWorks > to release the specs to me for their I2C and SMBus stuff. I am working > out the details of the confidentiality agreement with them right now. > If I was able to provide you with the specs and some hardware could you > make use of this to complete support for this MB and the chips on it? > > Thanks > > Matthew > > -- > Matthew M. Brichacek > Linux Development Lab R&D Engineer > Hewlett Packard Company > 3404 Harmony Road > Ft. Collins, Colorado 80528-9599 > Phone: (970) 898-7346 > email: mmbrich at ldl.fc.hp.com > __ > / /\ > / / \ > __ /_/ /\ \ > /_/\ __\ \ \_\ \ > \ \ \/ /\\ \ \/ / > \ \ \/ \\ \ / > \ \ /\ \\ \ \ > \ \ \ \ \\ \ \ > \ \ \_\/ \ \ \ > \ \ \ \_\/ > \_\/ > i n v e n t
