Hi. I've had a couple problems, one somewhat serious
when using lm sensors.
System A: Duron 800 MHz on KT133A MoBo
Sensors output: attached file: sensors.out
Modules:
i2c-voodoo3 2720 0 (unused)
i2c-algo-bit 6880 2 [i2c-voodoo3]
eeprom 3056 0 (unused)
via686a 8256 0 (unused)
lm80 5216 0 (unused)
sensors 6320 0 [eeprom via686a lm80]
i2c-isa 1136 0 (unused)
i2c-viapro 3856 0 (unused)
i2c-core 12832 0 [i2c-algo-bit eeprom via686a lm80 sensors
i2c-isa i2c-viapro]
Problem 1: CPU/System temperatures should be swapped
Problem 2: When running "lvcool" to try to cool better, the
sensors program hangs after printing out data and only a
reboot will kill cpu hogging "zombie".
Problem 3: lm80 data is completely meaningless and all backwards
System B: Via C3 on VT82C694X based MoBo.
Problem: Output is meaningless, see attached file gauss.sensors.out
Thanks.
--
timothy.covell at ashavan.org.
-------------- next part --------------
lm80-i2c-0-2d
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
+5V: +4.26 V (min = +4.84 V, max = +0.00 V) ALARM
VTT: +1.47 V (min = +2.31 V, max = +1.51 V) ALARM
+3.3V: +2.33 V (min = +3.96 V, max = +3.28 V)
+Vcore: +0.00 V (min = +3.27 V, max = +2.74 V)
+12V: +13.01 V (min = +10.80 V, max = +11.43 V) ALARM
-12V: -8.42 V (min = -9.74 V, max = -7.66 V)
-5V: -3.19 V (min = -3.97 V, max = -2.74 V) ALARM
fan1: 10629 RPM (min = 6000 RPM, div = 1)
fan2: 12980 RPM (min = 6000 RPM, div = 1)
temp: +127.00 ?C (hot:limit = +6?C, hysteresis = +5?C) ALARM
(os: limit = +6?C, hysteresis = +5?C) ALARM
alarms: Board temperature input (a LM75 perhaps?) ALARM
alarms: Chassis intrusion detection ALARM
via686a-isa-6000
Adapter: ISA adapter
Algorithm: ISA algorithm
CPU core: +1.59 V (min = +1.79 V, max = +2.18 V)
+2.5V: +0.00 V (min = +2.24 V, max = +2.74 V)
I/O: +3.27 V (min = +2.95 V, max = +3.62 V)
+5V: +4.82 V (min = +4.47 V, max = +5.49 V)
+12V: +11.68 V (min = +12.52 V, max = +10.25 V)
CPU Fan: 6490 RPM (min = 135000 RPM, div = 2)
P/S Fan: 0 RPM (min = 3000 RPM, div = 2)
SYS Temp: +39.3?C (limit = -59?C, hysteresis = -61?C)
CPU Temp: +32.4?C (limit = -71?C, hysteresis = +86?C)
SBr Temp: +25.3?C (limit = +50?C, hysteresis = +60?C)
eeprom-i2c-0-50
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 256
eeprom-i2c-0-51
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 256
eeprom-i2c-2-50
Adapter: I2C Voodoo3/Banshee adapter
Algorithm: Bit-shift algorithm
-------------- next part --------------
lm80-i2c-0-2d
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
+5V: +3.61 V (min = +4.84 V, max = +0.00 V) ALARM
VTT: +1.39 V (min = +1.71 V, max = +1.51 V) ALARM
+3.3V: +2.40 V (min = +2.97 V, max = +3.63 V) ALARM
+Vcore: +3.11 V (min = +2.52 V, max = +3.08 V) ALARM
+12V: +13.33 V (min = +10.80 V, max = +13.20 V) ALARM
-12V: -5.09 V (min = -6.79 V, max = -4.71 V)
-5V: -1.67 V (min = -2.50 V, max = -1.28 V)
fan1: 10546 RPM (min = 6000 RPM, div = 1)
fan2: -1 RPM (min = 6783 RPM, div = 1)
temp: -128.00 ?C (hot:limit = +6?C, hysteresis = +5?C) ALARM
(os: limit = -73?C, hysteresis = +5?C) ALARM
alarms: Board temperature input (a LM75 perhaps?) ALARM
alarms: Chassis intrusion detection ALARM
eeprom-i2c-0-52
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
via686a-isa-6000
Adapter: ISA adapter
Algorithm: ISA algorithm
CPU core: +1.64 V (min = +1.79 V, max = +2.18 V)
+2.5V: +2.50 V (min = +2.48 V, max = +2.03 V)
I/O: +3.35 V (min = +3.32 V, max = +2.71 V)
+5V: +4.99 V (min = +5.17 V, max = +4.23 V)
+12V: +11.80 V (min = +12.52 V, max = +10.25 V)
CPU Fan: 0 RPM (min = 135000 RPM, div = 2)
P/S Fan: 0 RPM (min = 3000 RPM, div = 2)
SYS Temp: +27.6?C (limit = +50?C, hysteresis = -61?C)
CPU Temp: +28.8?C (limit = +50?C, hysteresis = +60?C)
SBr Temp: +22.5?C (limit = +50?C, hysteresis = +60?C)
