Hi all,
thanks for your quick support! With that information and additional info
from Andreas Willenbrink <Andreas.Willenbrink at web.de>, I now have a
working config as follows:
- in /etc/modules.conf:
alias char-major-89 i2c-isa
pre-install i2c-isa modprobe it87
options it87 temp_type=0x38
- in /etc/sensors.conf (comments stripped)
chip "it87-*"
label in0 "VCore"
label in1 "+2.5V"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "-12V"
label in6 "-5V"
label in7 "Stdby"
label in8 "Vbat"
label fan1 "CPU"
label fan2 "case"
set in0_min 1.75 * 0.95
set in0_max 1.75 * 1.05
set in1_min 2.4
set in1_max 2.6
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
set in4_min 12 * 0.95
set in4_max 12 * 1.05
set in5_min -12 * 0.95
set in5_max -12 * 1.05
set in6_min -5 * 0.93
set in6_max -5 * 1.07
set in7_min 5 * 0.95
set in7_max 5 * 1.05
ignore vid
compute in2 (1)*@ , @/(1)
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in4 ((30/10) +1)*@ , @/((30/10) +1)
compute in5 -(36/10)*@, -@/(36/10)
compute in6 -(56/10)*@, -@/(56/10)
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
ignore temp1
label temp2 "Temp2/MB"
set temp2_over 45
set temp2_hyst 35
label temp3 "Temp3/CPU"
set temp3_over 75
set temp3_hyst 60
set fan1_div 4
set fan1_min 3000
set fan2_div 4
set fan2_min 0
ignore fan3
Thanks again,
Albrecht :-))
>>>>>>>>>>>>>>>>>> Urspr?ngliche Nachricht <<<<<<<<<<<<<<<<<<
Am 19.12.01, 02:58:01, schrieb Nobody <nobody at Stimpy.netroedge.com> zum
Thema ---=== Lm_sensors Support DB Entry ===---:
> Your Lm_sensors support entry has been updated.
> Please go to http://www.netroedge.com/~lm78/support.html to check
> the status of your entry.
> Ticket # 757
