isadump 0x295 0x296 Jan Medlock wrote: > > here's the output from 'sensors': > > [medlock at milhouse medlock]$ sensors > eeprom-i2c-0-50 > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > > eeprom-i2c-0-51 > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > > w83627hf-isa-0290 > Adapter: ISA adapter > Algorithm: ISA algorithm > VCore 1: +1.79 V (min = +1.23 V, max = +1.36 V) > VCore 2: +0.00 V (min = +1.23 V, max = +1.36 V) > +3.3V: +1.50 V (min = +3.13 V, max = +3.45 V) > +5V: +4.97 V (min = +4.72 V, max = +5.24 V) > +12V: +11.89 V (min = +10.79 V, max = +13.19 V) > -12V: +2.10 V (min = -10.90 V, max = -13.21 V) > -5V: +0.52 V (min = -4.76 V, max = -5.26 V) > V5SB: +5.38 V (min = +4.72 V, max = +5.24 V) > VBat: +3.12 V (min = +2.40 V, max = +3.60 V) > fan1: 4963 RPM (min = 3000 RPM, div = 2) > fan2: 0 RPM (min = 3000 RPM, div = 2) > fan3: 0 RPM (min = 750 RPM, div = 8) > temp1: +24 (limit = +60, hysteresis = +50) sensor = > thermistor > temp2: +36.0 (limit = +60, hysteresis = +50) sensor = > thermistor > temp3: +255.5 (limit = +256, hysteresis = +256) sensor = > thermistor > vid: +1.30 V > alarms: Chassis intrusion detection > beep_enable: > Sound alarm disabled > > I was asked to do an 'i2cdump' but this doesn't work because the chip > is on an ISA bus. I presume that I should use 'isadump' but with what > arguments? > > Thanks.
