On Wednesday, 14. November 2001 19:04, Hans-Peter Jansen wrote:
> Hello,
>
> I'm trying to get serveral lm_sensor versions up to CVS lm_sensors2 from
> yesterday to run on this mb. Now, I'm at linux-2.4.15-pre4, but also tried
> some 2.4.12(-ac?) versions, to no avail.
I finally managed to get the w83781d loading under 2.4.13-ac7. (b/c it's butt
kicking processor power)
But it's readings are bogus <BIOS>:
tyrex:~# sensors
w83782d-i2c-0-2d
Adapter: SMBus AMD7X6 adapter at 80e0
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.72 V (min = +1.74 V, max = +1.93 V) ALARM <1.75>
VCore 2: +2.83 V (min = +1.74 V, max = +1.93 V) <1.76>
+3.3V: +3.32 V (min = +3.13 V, max = +3.45 V)
+5V: +4.89 V (min = +4.72 V, max = +5.24 V) <5.11>
+12V: +4.67 V (min = +10.79 V, max = +13.19 V) <12.35>
-12V: -2.01 V (min = -10.90 V, max = -13.21 V) <-12.15>
-5V: +2.71 V (min = -4.76 V, max = -5.26 V)
V5SB: +4.32 V (min = +4.72 V, max = +5.24 V)
VBat: +3.29 V (min = +2.40 V, max = +3.60 V)
fan1: 7180 RPM (min = 3000 RPM, div = 2) <3590>
fan2: 7105 RPM (min = 3000 RPM, div = 2) <3515>
fan3: 0 RPM (min = 3000 RPM, div = 2)
temp1: +77.0?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor
<46?C>
temp2: +76.5?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor
<41?C>
temp3: +77.0?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor
<46?C>
vid: +1.85 V
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
ALARM flags seems to appear randomly and unrelated to error conditions.
Do I need completely new formula's for that beast?
Any further suggestions?
Cheers,
Hans-Peter
