My temps are all over the map. They seem to be related to the temperature, but they go from negatives to large positives often. I haven't bothered to check out the datasheet and the code yet to see if there is a bug, or if it is a hw implementation specific issue. Phil On Tue, Nov 13, 2001 at 04:07:05PM -0800, Bob Ramstad wrote: > Phil, thanks for your help. > > I had no problems getting the "sensors" program to work on this m/b > with your instructions and the instructions in the tarballs. > > It does appear that sensors.conf may not be entirely correct, but > that's OK for my needs, as I really just want to track change in > temperature over time. > > For reference, if interested, I added the following lines to the end > of my /etc/rc.local: > > # sensors kernel modules > /sbin/insmod i2c-core > /sbin/insmod i2c-proc > /sbin/insmod i2c-isa > /sbin/insmod it87 > > The program "sensors" runs fine and gives output like the following: > > it87-isa-0290 > Adapter: ISA adapter > Algorithm: ISA algorithm > VCore 1: +1.74 V (min = +1.53 V, max = +1.87 V) > VCore 2: +3.04 V (min = +2.25 V, max = +2.75 V) ALARM > +3.3V: +3.26 V (min = +2.96 V, max = +3.60 V) > +5V: +4.99 V (min = +4.50 V, max = +5.48 V) > +12V: +12.00 V (min = +11.36 V, max = +13.80 V) > -12V: -12.10 V (min = -10.80 V, max = -13.10 V) > -5V: -5.15 V (min = -4.54 V, max = -5.43 V) > Stdby: +4.89 V (min = +4.50 V, max = +5.48 V) > in8: +0.97 V > fan1: 7848 RPM (min = 3000 RPM, div = 2) > fan2: 5769 RPM (min = 3000 RPM, div = 2) > Temp1/MB: +26?C (min = +20?C, max = +60?C) > Temp2/CPU: -117?C (min = +20?C, max = +60?C) > > I hope this information is helpful -- perhaps this could be edited and > included on the site or in the tarball? > > If a better sensors.conf materializes, I'd be interested in trying it > out. > > Thanks again! > > -- Bob > -- Philip Edelbrock -- IS Manager -- Edge Design, Corvallis, OR phil at netroedge.com -- http://www.netroedge.com/~phil PGP F16: 01 D2 FD 01 B5 46 F4 F0 3A 8B 9D 7E 14 7F FB 7A
