Re: [PATCH] xfs: fail dax mount if reflink is enabled on a partition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2022/10/24 13:31, Dave Chinner 写道:
> On Mon, Oct 24, 2022 at 03:17:52AM +0000, ruansy.fnst@xxxxxxxxxxx wrote:
>> 在 2022/10/24 6:00, Dave Chinner 写道:
>>> On Fri, Oct 21, 2022 at 07:11:02PM -0700, Darrick J. Wong wrote:
>>>> On Thu, Oct 20, 2022 at 10:17:45PM +0800, Yang, Xiao/杨 晓 wrote:
>>>>> In addition, I don't like your idea about the test change because it will
>>>>> make generic/470 become the special test for XFS. Do you know if we can fix
>>>>> the issue by changing the test in another way? blkdiscard -z can fix the
>>>>> issue because it does zero-fill rather than discard on the block device.
>>>>> However, blkdiscard -z will take a lot of time when the block device is
>>>>> large.
>>>>
>>>> Well we /could/ just do that too, but that will suck if you have 2TB of
>>>> pmem. ;)
>>>>
>>>> Maybe as an alternative path we could just create a very small
>>>> filesystem on the pmem and then blkdiscard -z it?
>>>>
>>>> That said -- does persistent memory actually have a future?  Intel
>>>> scuttled the entire Optane product, cxl.mem sounds like expansion
>>>> chassis full of DRAM, and fsdax is horribly broken in 6.0 (weird kernel
>>>> asserts everywhere) and 6.1 (every time I run fstests now I see massive
>>>> data corruption).
>>>
>>> Yup, I see the same thing. fsdax was a train wreck in 6.0 - broken
>>> on both ext4 and XFS. Now that I run a quick check on 6.1-rc1, I
>>> don't think that has changed at all - I still see lots of kernel
>>> warnings, data corruption and "XFS_IOC_CLONE_RANGE: Invalid
>>> argument" errors.
>>
>> Firstly, I think the "XFS_IOC_CLONE_RANGE: Invalid argument" error is
>> caused by the restrictions which prevent reflink work together with DAX:
>>
>> a. fs/xfs/xfs_ioctl.c:1141
>> /* Don't allow us to set DAX mode for a reflinked file for now. */
>> if ((fa->fsx_xflags & FS_XFLAG_DAX) && xfs_is_reflink_inode(ip))
>>          return -EINVAL;
>>
>> b. fs/xfs/xfs_iops.c:1174
>> /* Only supported on non-reflinked files. */
>> if (xfs_is_reflink_inode(ip))
>>          return false;
>>
>> These restrictions were removed in "drop experimental warning" patch[1].
>>    I think they should be separated from that patch.
>>
>> [1]
>> https://lore.kernel.org/linux-xfs/1663234002-17-1-git-send-email-ruansy.fnst@xxxxxxxxxxx/
>>
>>
>> Secondly, how the data corruption happened?
> 
> No idea - i"m just reporting that lots of fsx tests failed with data
> corruptions. I haven't had time to look at why, I'm still trying to
> sort out the fix for a different data corruption...
> 
>> Or which case failed?
> 
> *lots* of them failed with kernel warnings with reflink turned off:
> 
> SECTION       -- xfs_dax_noreflink
> =========================
> Failures: generic/051 generic/068 generic/075 generic/083
> generic/112 generic/127 generic/198 generic/231 generic/247
> generic/269 generic/270 generic/340 generic/344 generic/388
> generic/461 generic/471 generic/476 generic/519 generic/561 xfs/011
> xfs/013 xfs/073 xfs/297 xfs/305 xfs/517 xfs/538
> Failed 26 of 1079 tests
> 
> All of those except xfs/073 and generic/471 are failures due to
> warnings found in dmesg.
> 
> With reflink enabled, I terminated the run after g/075, g/091, g/112
> and generic/127 reported fsx data corruptions and g/051, g/068,
> g/075 and g/083 had reported kernel warnings in dmesg.
> 
>> Could
>> you give me more info (such as mkfs options, xfstests configs)?
> 
> They are exactly the same as last time I reported these problems.
> 
> For the "no reflink" test issues:
> 
> mkfs options are "-m reflink=0,rmapbt=1", mount options "-o
> dax=always" for both filesytems.  Config output at start of test
> run:
> 
> SECTION       -- xfs_dax_noreflink
> FSTYP         -- xfs (debug)
> PLATFORM      -- Linux/x86_64 test3 6.1.0-rc1-dgc+ #1615 SMP PREEMPT_DYNAMIC Wed Oct 19 12:24:16 AEDT 2022
> MKFS_OPTIONS  -- -f -m reflink=0,rmapbt=1 /dev/pmem1
> MOUNT_OPTIONS -- -o dax=always -o context=system_u:object_r:root_t:s0 /dev/pmem1 /mnt/scratch
> 
> pmem devices are a pair of fake 8GB pmem regions set up by kernel
> CLI via "memmap=8G!15G,8G!24G". I don't have anything special set up
> - the kernel config is kept minimal for these VMs - and the only
> kernel debug option I have turned on for these specific test runs is
> CONFIG_XFS_DEBUG=y.

Thanks for the detailed info.  But, in my environment (and my 
colleagues', and our real server with DCPMM) these failure cases (you 
mentioned above, in dax+non_reflink mode, with same test options) cannot 
reproduce.

Here's our test environment info:
  - Ruan's env: fedora 36(v6.0-rc1) on kvm,pmem 2x4G:file backended
  - Yang's env: fedora 35(v6.1-rc1) on kvm,pmem 2x1G:memmap=1G!1G,1G!2G
  - Server's  : Ubuntu 20.04(v6.0-rc1) real machine,pmem 2x4G:real DCPMM

(To quickly confirm the difference, I just ran the failed 26 cases you 
mentioned above.)  Except for generic/471 and generic/519, which failed 
even when dax is off, the rest passed.


We don't want fsdax to be truned off.  Right now, I think the most 
important thing is solving the failed cases in dax+non_reflink mode. 
So, firstly, I have to reproduce those failures.  Is there any thing 
wrong with my test environments?  I konw you are using 'memmap=XXG!YYG' to 
simulate pmem.  So, (to Darrick) could you show me your config of dev 
environment and the 'testcloud'(I am guessing it's a server with real 
nvdimm just like ours)?


(I just found I only tested on 4G and smaller pmem device.  I'll try the 
test on 8G pmem)

> 
> THe only difference between the noreflink and reflink runs is that I
> drop the "-m reflink=0" mkfs parameter. Otherwise they are identical
> and the errors I reported are from back-to-back fstests runs without
> rebooting the VM....
> 
> -Dave.


--
Thanks,
Ruan.




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux