Hi Eryu,
Thanks for the feedback. Apologies for the delay getting back to you,
I hadn't noticed the rest of your questions under Darrick's reply.
On 25/05/2020 02:46, Eryu Guan wrote:
> On Wed, May 20, 2020 at 01:52:58PM +1000, Donald Douwsma wrote:
>> xfs_repair's interval based progress has been broken for
>> some time, create a test based on dmdelay to stretch out
>> the time and use ag_stride to force parallelism.
>>
>> Signed-off-by: Donald Douwsma <ddouwsma@xxxxxxxxxx>
>> ---
>> Changes since v1:
>> - Use _scratch_xfs_repair
>> - Filter only repair output
>> - Make the filter more tolerant of whitespace and plurals
>> - Take golden output from 'xfs_repair: fix progress reporting'
>
> I saw failures like below, and I'm using v5.7-rc4 kernel and v5.4.0
> xfsprogs, is this expected failure?
This should be passing now.
>
> @@ -2,8 +2,6 @@
> Format and populate
> Introduce a dmdelay
> Run repair
> - - #:#:#: Phase #: #% done - estimated remaining time # minute, # second
> - - #:#:#: Phase #: elapsed time # second - processed # inodes per minute
> - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done
> - #:#:#: process known inodes and inode discovery - # of # inodes done
> - #:#:#: process newly discovered inodes - # of # allocation groups done
> @@ -12,4 +10,3 @@
> - #:#:#: scanning filesystem freespace - # of # allocation groups done
> - #:#:#: setting up duplicate extent list - # of # allocation groups done
> - #:#:#: verify and correct link counts - # of # allocation groups done
> - - #:#:#: zeroing log - # of # blocks done
>
>>
>> tests/xfs/516 | 76 +++++++++++++++++++++++++++++++++++++++++++++++
>> tests/xfs/516.out | 15 ++++++++++
>> tests/xfs/group | 1 +
>> 3 files changed, 92 insertions(+)
>> create mode 100755 tests/xfs/516
>> create mode 100644 tests/xfs/516.out
>>
>> diff --git a/tests/xfs/516 b/tests/xfs/516
>> new file mode 100755
>> index 00000000..1c0508ef
>> --- /dev/null
>> +++ b/tests/xfs/516
>> @@ -0,0 +1,76 @@
>> +#! /bin/bash
>> +# SPDX-License-Identifier: GPL-2.0
>> +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
>> +#
>> +# FS QA Test 516
>> +#
>> +# Test xfs_repair's progress reporting
>> +#
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=1 # failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>
> rm -f $tmp.*
>
> As some common helpers would use $tmp. files as well.
>
>> + cd /
>> + _dmsetup_remove delay-test > /dev/null 2>&1
>
> I think we could do _cleanup_delay here and discard the outputs.
>
Fixed.
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +. ./common/dmdelay
>> +. ./common/populate
>> +
>> +# remove previous $seqres.full before test
>> +rm -f $seqres.full
>> +
>> +# real QA test starts here
>> +
>> +# Modify as appropriate.
>> +_supported_fs xfs
>> +_supported_os Linux
>> +_require_scratch
>> +_require_dm_target delay
>> +
>> +# Filter output specific to the formatters in xfs_repair/progress.c
>> +# Ideally we'd like to see hits on anything that matches
>> +# awk '/{FMT/' repair/progress.c
>> +_filter_repair()
>
> Function names with the leading underscore are reserved for common
> helpers, filter_repair would be fine.
Fixed.
>
>> +{
>> + sed -ne '
>> + s/[0-9]\+/#/g;
>> + s/^\s\+/ /g;
>> + s/\(second\|minute\)s/\1/g
>> + /#:#:#:/p
>> + '
>> +}
>> +
>> +echo "Format and populate"
>> +_scratch_populate_cached nofill > $seqres.full 2>&1
>> +
>> +echo "Introduce a dmdelay"
>> +_init_delay
>> +
>> +# Introduce a read I/O delay
>> +# The default in common/dmdelay is a bit too agressive
>> +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
>> +DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 100 $SCRATCH_DEV 0 0"
>> +_load_delay_table $DELAY_READ
>> +
>> +echo "Run repair"
>> +SCRATCH_DEV=$DELAY_DEV _scratch_xfs_repair -o ag_stride=4 -t 1 2>&1 |
>> + tee -a $seqres.full > $seqres.xfs_repair.out
>> +
>> +cat $seqres.xfs_repair.out | _filter_repair | sort -u
>
> I agreed with Darrick here. redirect output to $tmp.repair is better, as
> we already cleanup $tmp.* in _cleanup, and no one is cleaning up
> $seqres.xfs_repair.out file.
>
>> +
>> +_cleanup_delay
>
> We could remove this one if do it in _cleanup.
Done!
>
>> +
>> +# success, all done
>> +status=0
>> +exit
>> diff --git a/tests/xfs/516.out b/tests/xfs/516.out
>> new file mode 100644
>> index 00000000..85018b93
>> --- /dev/null
>> +++ b/tests/xfs/516.out
>> @@ -0,0 +1,15 @@
>> +QA output created by 516
>> +Format and populate
>> +Introduce a dmdelay
>> +Run repair
>> + - #:#:#: Phase #: #% done - estimated remaining time # minute, # second
>> + - #:#:#: Phase #: elapsed time # second - processed # inodes per minute
>> + - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done
>> + - #:#:#: process known inodes and inode discovery - # of # inodes done
>> + - #:#:#: process newly discovered inodes - # of # allocation groups done
>> + - #:#:#: rebuild AG headers and trees - # of # allocation groups done
>> + - #:#:#: scanning agi unlinked lists - # of # allocation groups done
>> + - #:#:#: scanning filesystem freespace - # of # allocation groups done
>> + - #:#:#: setting up duplicate extent list - # of # allocation groups done
>> + - #:#:#: verify and correct link counts - # of # allocation groups done
>> + - #:#:#: zeroing log - # of # blocks done
>> diff --git a/tests/xfs/group b/tests/xfs/group
>> index 12eb55c9..aeeca23f 100644
>> --- a/tests/xfs/group
>> +++ b/tests/xfs/group
>> @@ -513,3 +513,4 @@
>> 513 auto mount
>> 514 auto quick db
>> 515 auto quick quota
>> +516 repair
>
> Should be in auto group as well? Only tests in auto (and quick, which is
> a sub-set of auto) will be run by default.
It doesn't seem there were any objections to adding it, so I've added it to
auto, I've left it out of quick for now.
Regards,
Don
