On Tue, May 19, 2020 at 04:55:12PM +1000, Donald Douwsma wrote:
> xfs_repair's interval based progress has been broken for
> some time, create a test based on dmdelay to stretch out
> the time and use ag_stride to force parallelism.
>
> Signed-off-by: Donald Douwsma <ddouwsma@xxxxxxxxxx>
> ---
> tests/xfs/516 | 72 +++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/516.out | 15 ++++++++++
> tests/xfs/group | 1 +
> 3 files changed, 88 insertions(+)
> create mode 100755 tests/xfs/516
> create mode 100644 tests/xfs/516.out
>
> diff --git a/tests/xfs/516 b/tests/xfs/516
> new file mode 100755
> index 00000000..5ad57fbc
> --- /dev/null
> +++ b/tests/xfs/516
> @@ -0,0 +1,72 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test 516
> +#
> +# Test xfs_repair's progress reporting
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + _dmsetup_remove delay-test > /dev/null 2>&1
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/dmdelay
> +. ./common/populate
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs xfs
> +_supported_os Linux
> +_require_scratch
> +_require_dm_target delay
> +
> +# Filter output specific to the formatters in xfs_repair/progress.c
> +# Ideally we'd like to see hits on anything that matches
> +# awk '/{FMT/' repair/progress.c
> +_filter_repair()
> +{
> + sed -ne '
> + s/[0-9]\+/#/g;
> + /#:#:#:/p
> + '
> +}
> +
> +echo "Format and populate"
> +_scratch_populate_cached nofill > $seqres.full 2>&1
> +
> +echo "Introduce a dmdelay"
> +_init_delay
> +
> +# Introduce a read I/O delay
> +# The default in common/dmdelay is a bit too agressive
> +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> +DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 100 $SCRATCH_DEV 0 0"
> +_load_delay_table $DELAY_READ
> +
> +echo "Run repair"
> +$XFS_REPAIR_PROG -o ag_stride=4 -t 1 $DELAY_DEV >> $seqres.full 2>&1
Hmm... if the scratch device had an external log device, this raw
invocation of repair won't run because it won't have the log parameter.
Normally I'd say just use _scratch_xfs_repair here, but since there's a
delay device involved, things get trickier...
...or maybe they don't?
SCRATCH_DEV=$DELAY_DEV _scratch_xfs_repair -o ag_stride...
might work, seeing as we do that in a few places...
> +cat $seqres.full | _filter_repair | sort -u
You also might want to redirect the repair output to a separate file so
that you can filter and sort /only/ the repair output in the process of
logging the repair results to stdout and $seqres.full.
--D
> +
> +_cleanup_delay
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/516.out b/tests/xfs/516.out
> new file mode 100644
> index 00000000..bc824d7f
> --- /dev/null
> +++ b/tests/xfs/516.out
> @@ -0,0 +1,15 @@
> +QA output created by 516
> +Format and populate
> +Introduce a dmdelay
> +Run repair
> + - #:#:#: Phase #: #% done - estimated remaining time # minutes, # seconds
> + - #:#:#: Phase #: elapsed time # second - processed # inodes per minute
> + - #:#:#: Phase #: elapsed time # seconds - processed # inodes per minute
> + - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done
> + - #:#:#: process known inodes and inode discovery - # of # inodes done
> + - #:#:#: process newly discovered inodes - # of # allocation groups done
> + - #:#:#: rebuild AG headers and trees - # of # allocation groups done
> + - #:#:#: scanning agi unlinked lists - # of # allocation groups done
> + - #:#:#: scanning filesystem freespace - # of # allocation groups done
> + - #:#:#: setting up duplicate extent list - # of # allocation groups done
> + - #:#:#: verify and correct link counts - # of # allocation groups done
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 12eb55c9..aeeca23f 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -513,3 +513,4 @@
> 513 auto mount
> 514 auto quick db
> 515 auto quick quota
> +516 repair
> --
> 2.18.4
>
