On Sun, Nov 18, 2018 at 09:51:08PM +0800, Eryu Guan wrote:
> On Fri, Nov 16, 2018 at 11:26:26AM -0800, Darrick J. Wong wrote:
> > On Tue, Nov 13, 2018 at 03:39:43PM -0800, Darrick J. Wong wrote:
> > > From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> > >
> > > Add support for FICLONERANGE to fsx.
> > >
> > > Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> > > ---
> > > ltp/fsx.c | 182 +++++++++++++++++++++++++++++++++++++++++++++++++++++--------
> > > 1 file changed, 158 insertions(+), 24 deletions(-)
> > >
> > >
> > > diff --git a/ltp/fsx.c b/ltp/fsx.c
> > > index b0157ba3..2b0a2b28 100644
> > > --- a/ltp/fsx.c
> > > +++ b/ltp/fsx.c
> > > @@ -88,25 +88,28 @@ int logcount = 0; /* total ops */
> > > * mode being run.
> > > */
> > >
> > > -/* common operations */
> > > -#define OP_READ 0
> > > -#define OP_WRITE 1
> > > -#define OP_MAPREAD 2
> > > -#define OP_MAPWRITE 3
> > > -#define OP_MAX_LITE 4
> > > -
> > > -/* !lite operations */
> > > -#define OP_TRUNCATE 4
> > > -#define OP_FALLOCATE 5
> > > -#define OP_PUNCH_HOLE 6
> > > -#define OP_ZERO_RANGE 7
> > > -#define OP_COLLAPSE_RANGE 8
> > > -#define OP_INSERT_RANGE 9
> > > -#define OP_MAX_FULL 10
> > > -
> > > -/* integrity operations */
> > > -#define OP_FSYNC 10
> > > -#define OP_MAX_INTEGRITY 11
> > > +enum {
> > > + /* common operations */
> > > + OP_READ = 0,
> > > + OP_WRITE,
> > > + OP_MAPREAD,
> > > + OP_MAPWRITE,
> > > + OP_MAX_LITE,
> > > +
> > > + /* !lite operations */
> > > + OP_TRUNCATE = OP_MAX_LITE,
> > > + OP_FALLOCATE,
> > > + OP_PUNCH_HOLE,
> > > + OP_ZERO_RANGE,
> > > + OP_COLLAPSE_RANGE,
> > > + OP_INSERT_RANGE,
> > > + OP_CLONE_RANGE,
> > > + OP_MAX_FULL,
> > > +
> > > + /* integrity operations */
> > > + OP_FSYNC = OP_MAX_FULL,
> > > + OP_MAX_INTEGRITY,
> > > +};
> > >
> > > #undef PAGE_SIZE
> > > #define PAGE_SIZE getpagesize()
> > > @@ -160,6 +163,7 @@ int punch_hole_calls = 1; /* -H flag disables */
> > > int zero_range_calls = 1; /* -z flag disables */
> > > int collapse_range_calls = 1; /* -C flag disables */
> > > int insert_range_calls = 1; /* -I flag disables */
> > > +int remap_calls = 1; /* -J flag disables */
> > > int mapped_reads = 1; /* -R flag disables it */
> > > int integrity = 0; /* -i flag */
> > > int fsxgoodfd = 0;
> > > @@ -254,6 +258,7 @@ static const char *op_names[] = {
> > > [OP_ZERO_RANGE] = "zero_range",
> > > [OP_COLLAPSE_RANGE] = "collapse_range",
> > > [OP_INSERT_RANGE] = "insert_range",
> > > + [OP_CLONE_RANGE] = "clone_range",
> > > [OP_FSYNC] = "fsync",
> > > };
> > >
> > > @@ -275,6 +280,25 @@ static int op_code(const char *name)
> > > return -1;
> > > }
> > >
> > > +void
> > > +log5(int operation, int arg0, int arg1, int arg2, enum opflags flags)
> > > +{
> > > + struct log_entry *le;
> > > +
> > > + le = &oplog[logptr];
> > > + le->operation = operation;
> > > + if (closeopen)
> > > + flags |= FL_CLOSE_OPEN;
> > > + le->args[0] = arg0;
> > > + le->args[1] = arg1;
> > > + le->args[2] = arg2;
> >
> > I would like to withdraw this patch so that I can add a fourth args[]
> > slot so that we can maintain the convention of printing the
> > pre-operation file size after the other operation arguments. This will
> > make tracking the location of EOF through an fsxops file easier.
>
> I'll wait for the new version of the whole patchset then, that gives me
> extra time to look at & test them :)
I also added separate command line arguments to disable each of {clone,
dedupe, copy} range, and fixed the "does this overlap with the bad
range" reporting. I also added a new mode where you can ask fsx to
reread the entire file after every operation to look for corruption
problems. Will send patches shortly.
--D
> Thanks,
> Eryu
>
> >
> > --D
> >
> > > + le->flags = flags;
> > > + logptr++;
> > > + logcount++;
> > > + if (logptr >= LOGSIZE)
> > > + logptr = 0;
> > > +}
> > > +
> > > void
> > > log4(int operation, int arg0, int arg1, enum opflags flags)
> > > {
> > > @@ -294,7 +318,6 @@ log4(int operation, int arg0, int arg1, enum opflags flags)
> > > logptr = 0;
> > > }
> > >
> > > -
> > > void
> > > logdump(void)
> > > {
> > > @@ -418,6 +441,13 @@ logdump(void)
> > > if (overlap)
> > > prt("\t******IIII");
> > > break;
> > > + case OP_CLONE_RANGE:
> > > + prt("CLONE 0x%x thru 0x%x\t(0x%x bytes) to 0x%x",
> > > + lp->args[0], lp->args[0] + lp->args[1] - 1,
> > > + lp->args[1], lp->args[2]);
> > > + if (overlap)
> > > + prt("\t******IIII");
> > > + break;
> > > case OP_FSYNC:
> > > prt("FSYNC");
> > > break;
> > > @@ -1218,6 +1248,73 @@ do_insert_range(unsigned offset, unsigned length)
> > > }
> > > #endif
> > >
> > > +#ifdef FICLONERANGE
> > > +void
> > > +do_clone_range(unsigned offset, unsigned length, unsigned dest)
> > > +{
> > > + struct file_clone_range fcr;
> > > +
> > > + if (length == 0) {
> > > + if (!quiet && testcalls > simulatedopcount)
> > > + prt("skipping zero length clone range\n");
> > > + log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> > > + return;
> > > + }
> > > +
> > > + if ((loff_t)offset >= file_size) {
> > > + if (!quiet && testcalls > simulatedopcount)
> > > + prt("skipping clone range behind EOF\n");
> > > + log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> > > + return;
> > > + }
> > > +
> > > + log5(OP_CLONE_RANGE, offset, length, dest, FL_NONE);
> > > +
> > > + if (testcalls <= simulatedopcount)
> > > + return;
> > > +
> > > + if ((progressinterval && testcalls % progressinterval == 0) ||
> > > + (debug && (monitorstart == -1 || monitorend == -1 ||
> > > + dest <= monitorstart || dest + length <= monitorend))) {
> > > + prt("%lu clone\tfrom 0x%x to 0x%x, (0x%x bytes) at 0x%x\n",
> > > + testcalls, offset, offset+length, length, dest);
> > > + }
> > > +
> > > + fcr.src_fd = fd;
> > > + fcr.src_offset = offset;
> > > + fcr.src_length = length;
> > > + fcr.dest_offset = dest;
> > > +
> > > + if (ioctl(fd, FICLONERANGE, &fcr) == -1) {
> > > + if (errno == EOPNOTSUPP || errno == ENOTTY) {
> > > + if (!quiet && testcalls > simulatedopcount)
> > > + prt("skipping unsupported clone range\n");
> > > + logptr--;
> > > + log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> > > + return;
> > > + }
> > > +
> > > + prt("clone range: 0x%x to 0x%x at 0x%x\n", offset,
> > > + offset + length, dest);
> > > + prterr("do_clone_range: FICLONERANGE");
> > > + report_failure(161);
> > > + }
> > > +
> > > + memcpy(good_buf + dest, good_buf + offset, length);
> > > + if (dest > file_size)
> > > + memset(good_buf + file_size, '\0', dest - file_size);
> > > + if (dest + length > file_size)
> > > + file_size = dest + length;
> > > +}
> > > +
> > > +#else
> > > +void
> > > +do_clone_range(unsigned offset, unsigned length, unsigned dest)
> > > +{
> > > + return;
> > > +}
> > > +#endif
> > > +
> > > #ifdef HAVE_LINUX_FALLOC_H
> > > /* fallocate is basically a no-op unless extending, then a lot like a truncate */
> > > void
> > > @@ -1374,6 +1471,7 @@ cleanup(int sig)
> > > static int
> > > read_op(struct log_entry *log_entry)
> > > {
> > > + char *end;
> > > char line[256];
> > >
> > > memset(log_entry, 0, sizeof(*log_entry));
> > > @@ -1404,8 +1502,6 @@ read_op(struct log_entry *log_entry)
> > > if (log_entry->operation == -1)
> > > goto fail;
> > > for (i = 0; i < 3; i++) {
> > > - char *end;
> > > -
> > > str = strtok(NULL, " \t\n");
> > > if (!str)
> > > goto fail;
> > > @@ -1438,7 +1534,7 @@ read_op(struct log_entry *log_entry)
> > > int
> > > test(void)
> > > {
> > > - unsigned long offset;
> > > + unsigned long offset, offset2;
> > > unsigned long size;
> > > unsigned long rv;
> > > unsigned long op;
> > > @@ -1469,6 +1565,7 @@ test(void)
> > > op = log_entry.operation;
> > > offset = log_entry.args[0];
> > > size = log_entry.args[1];
> > > + offset2 = log_entry.args[2];
> > > closeopen = !!(log_entry.flags & FL_CLOSE_OPEN);
> > > keep_size = !!(log_entry.flags & FL_KEEP_SIZE);
> > > goto have_op;
> > > @@ -1481,6 +1578,7 @@ test(void)
> > > closeopen = (rv >> 3) < (1 << 28) / closeprob;
> > >
> > > offset = random();
> > > + offset2 = 0;
> > > size = maxoplen;
> > > if (randomoplen)
> > > size = random() % (maxoplen + 1);
> > > @@ -1506,6 +1604,17 @@ test(void)
> > > if (zero_range_calls && size && keep_size_calls)
> > > keep_size = random() % 2;
> > > break;
> > > + case OP_CLONE_RANGE:
> > > + TRIM_OFF_LEN(offset, size, file_size);
> > > + offset = offset & ~(block_size - 1);
> > > + size = size & ~(block_size - 1);
> > > + do {
> > > + offset2 = random();
> > > + TRIM_OFF(offset2, maxfilelen);
> > > + offset2 = offset2 & ~(block_size - 1);
> > > + } while (llabs(offset2 - offset) < size ||
> > > + offset2 + size > maxfilelen);
> > > + break;
> > > }
> > >
> > > have_op:
> > > @@ -1549,6 +1658,12 @@ test(void)
> > > goto out;
> > > }
> > > break;
> > > + case OP_CLONE_RANGE:
> > > + if (!remap_calls) {
> > > + log5(op, offset, size, offset2, FL_SKIPPED);
> > > + goto out;
> > > + }
> > > + break;
> > > }
> > >
> > > switch (op) {
> > > @@ -1615,6 +1730,18 @@ test(void)
> > >
> > > do_insert_range(offset, size);
> > > break;
> > > + case OP_CLONE_RANGE:
> > > + if (size == 0) {
> > > + log5(OP_CLONE_RANGE, offset, size, offset2, FL_SKIPPED);
> > > + goto out;
> > > + }
> > > + if (offset2 + size > maxfilelen) {
> > > + log5(OP_CLONE_RANGE, offset, size, offset2, FL_SKIPPED);
> > > + goto out;
> > > + }
> > > +
> > > + do_clone_range(offset, size, offset2);
> > > + break;
> > > case OP_FSYNC:
> > > dofsync();
> > > break;
> > > @@ -1637,7 +1764,7 @@ void
> > > usage(void)
> > > {
> > > fprintf(stdout, "usage: %s",
> > > - "fsx [-dknqxAFLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
> > > + "fsx [-dknqxAFJLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
> > > -b opnum: beginning operation number (default 1)\n\
> > > -c P: 1 in P chance of file close+open at each op (default infinity)\n\
> > > -d: debug output for all operations\n\
> > > @@ -1678,6 +1805,10 @@ usage(void)
> > > #ifdef FALLOC_FL_INSERT_RANGE
> > > " -I: Do not use insert range calls\n"
> > > #endif
> > > +#if defined(FICLONERANGE) || defined(FIDEDUPERANGE) || \
> > > + defined(HAVE_COPY_FILE_RANGE)
> > > +" -J: Do not use clone/dedupe/copy range calls\n"
> > > +#endif
> > > " -L: fsxLite - no file creations & no file size changes\n\
> > > -N numops: total # operations to do (default infinity)\n\
> > > -O: use oplen (see -o flag) for every op (default random)\n\
> > > @@ -2010,6 +2141,9 @@ main(int argc, char **argv)
> > > case 'I':
> > > insert_range_calls = 0;
> > > break;
> > > + case 'J':
> > > + remap_calls = 0;
> > > + break;
> > > case 'L':
> > > lite = 1;
> > > o_flags &= ~(O_CREAT|O_TRUNC);
> > >
