On Tue, Nov 13, 2018 at 03:39:43PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
>
> Add support for FICLONERANGE to fsx.
>
> Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> ---
> ltp/fsx.c | 182 +++++++++++++++++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 158 insertions(+), 24 deletions(-)
>
>
> diff --git a/ltp/fsx.c b/ltp/fsx.c
> index b0157ba3..2b0a2b28 100644
> --- a/ltp/fsx.c
> +++ b/ltp/fsx.c
> @@ -88,25 +88,28 @@ int logcount = 0; /* total ops */
> * mode being run.
> */
>
> -/* common operations */
> -#define OP_READ 0
> -#define OP_WRITE 1
> -#define OP_MAPREAD 2
> -#define OP_MAPWRITE 3
> -#define OP_MAX_LITE 4
> -
> -/* !lite operations */
> -#define OP_TRUNCATE 4
> -#define OP_FALLOCATE 5
> -#define OP_PUNCH_HOLE 6
> -#define OP_ZERO_RANGE 7
> -#define OP_COLLAPSE_RANGE 8
> -#define OP_INSERT_RANGE 9
> -#define OP_MAX_FULL 10
> -
> -/* integrity operations */
> -#define OP_FSYNC 10
> -#define OP_MAX_INTEGRITY 11
> +enum {
> + /* common operations */
> + OP_READ = 0,
> + OP_WRITE,
> + OP_MAPREAD,
> + OP_MAPWRITE,
> + OP_MAX_LITE,
> +
> + /* !lite operations */
> + OP_TRUNCATE = OP_MAX_LITE,
> + OP_FALLOCATE,
> + OP_PUNCH_HOLE,
> + OP_ZERO_RANGE,
> + OP_COLLAPSE_RANGE,
> + OP_INSERT_RANGE,
> + OP_CLONE_RANGE,
> + OP_MAX_FULL,
> +
> + /* integrity operations */
> + OP_FSYNC = OP_MAX_FULL,
> + OP_MAX_INTEGRITY,
> +};
>
> #undef PAGE_SIZE
> #define PAGE_SIZE getpagesize()
> @@ -160,6 +163,7 @@ int punch_hole_calls = 1; /* -H flag disables */
> int zero_range_calls = 1; /* -z flag disables */
> int collapse_range_calls = 1; /* -C flag disables */
> int insert_range_calls = 1; /* -I flag disables */
> +int remap_calls = 1; /* -J flag disables */
> int mapped_reads = 1; /* -R flag disables it */
> int integrity = 0; /* -i flag */
> int fsxgoodfd = 0;
> @@ -254,6 +258,7 @@ static const char *op_names[] = {
> [OP_ZERO_RANGE] = "zero_range",
> [OP_COLLAPSE_RANGE] = "collapse_range",
> [OP_INSERT_RANGE] = "insert_range",
> + [OP_CLONE_RANGE] = "clone_range",
> [OP_FSYNC] = "fsync",
> };
>
> @@ -275,6 +280,25 @@ static int op_code(const char *name)
> return -1;
> }
>
> +void
> +log5(int operation, int arg0, int arg1, int arg2, enum opflags flags)
> +{
> + struct log_entry *le;
> +
> + le = &oplog[logptr];
> + le->operation = operation;
> + if (closeopen)
> + flags |= FL_CLOSE_OPEN;
> + le->args[0] = arg0;
> + le->args[1] = arg1;
> + le->args[2] = arg2;
I would like to withdraw this patch so that I can add a fourth args[]
slot so that we can maintain the convention of printing the
pre-operation file size after the other operation arguments. This will
make tracking the location of EOF through an fsxops file easier.
--D
> + le->flags = flags;
> + logptr++;
> + logcount++;
> + if (logptr >= LOGSIZE)
> + logptr = 0;
> +}
> +
> void
> log4(int operation, int arg0, int arg1, enum opflags flags)
> {
> @@ -294,7 +318,6 @@ log4(int operation, int arg0, int arg1, enum opflags flags)
> logptr = 0;
> }
>
> -
> void
> logdump(void)
> {
> @@ -418,6 +441,13 @@ logdump(void)
> if (overlap)
> prt("\t******IIII");
> break;
> + case OP_CLONE_RANGE:
> + prt("CLONE 0x%x thru 0x%x\t(0x%x bytes) to 0x%x",
> + lp->args[0], lp->args[0] + lp->args[1] - 1,
> + lp->args[1], lp->args[2]);
> + if (overlap)
> + prt("\t******IIII");
> + break;
> case OP_FSYNC:
> prt("FSYNC");
> break;
> @@ -1218,6 +1248,73 @@ do_insert_range(unsigned offset, unsigned length)
> }
> #endif
>
> +#ifdef FICLONERANGE
> +void
> +do_clone_range(unsigned offset, unsigned length, unsigned dest)
> +{
> + struct file_clone_range fcr;
> +
> + if (length == 0) {
> + if (!quiet && testcalls > simulatedopcount)
> + prt("skipping zero length clone range\n");
> + log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> + return;
> + }
> +
> + if ((loff_t)offset >= file_size) {
> + if (!quiet && testcalls > simulatedopcount)
> + prt("skipping clone range behind EOF\n");
> + log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> + return;
> + }
> +
> + log5(OP_CLONE_RANGE, offset, length, dest, FL_NONE);
> +
> + if (testcalls <= simulatedopcount)
> + return;
> +
> + if ((progressinterval && testcalls % progressinterval == 0) ||
> + (debug && (monitorstart == -1 || monitorend == -1 ||
> + dest <= monitorstart || dest + length <= monitorend))) {
> + prt("%lu clone\tfrom 0x%x to 0x%x, (0x%x bytes) at 0x%x\n",
> + testcalls, offset, offset+length, length, dest);
> + }
> +
> + fcr.src_fd = fd;
> + fcr.src_offset = offset;
> + fcr.src_length = length;
> + fcr.dest_offset = dest;
> +
> + if (ioctl(fd, FICLONERANGE, &fcr) == -1) {
> + if (errno == EOPNOTSUPP || errno == ENOTTY) {
> + if (!quiet && testcalls > simulatedopcount)
> + prt("skipping unsupported clone range\n");
> + logptr--;
> + log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> + return;
> + }
> +
> + prt("clone range: 0x%x to 0x%x at 0x%x\n", offset,
> + offset + length, dest);
> + prterr("do_clone_range: FICLONERANGE");
> + report_failure(161);
> + }
> +
> + memcpy(good_buf + dest, good_buf + offset, length);
> + if (dest > file_size)
> + memset(good_buf + file_size, '\0', dest - file_size);
> + if (dest + length > file_size)
> + file_size = dest + length;
> +}
> +
> +#else
> +void
> +do_clone_range(unsigned offset, unsigned length, unsigned dest)
> +{
> + return;
> +}
> +#endif
> +
> #ifdef HAVE_LINUX_FALLOC_H
> /* fallocate is basically a no-op unless extending, then a lot like a truncate */
> void
> @@ -1374,6 +1471,7 @@ cleanup(int sig)
> static int
> read_op(struct log_entry *log_entry)
> {
> + char *end;
> char line[256];
>
> memset(log_entry, 0, sizeof(*log_entry));
> @@ -1404,8 +1502,6 @@ read_op(struct log_entry *log_entry)
> if (log_entry->operation == -1)
> goto fail;
> for (i = 0; i < 3; i++) {
> - char *end;
> -
> str = strtok(NULL, " \t\n");
> if (!str)
> goto fail;
> @@ -1438,7 +1534,7 @@ read_op(struct log_entry *log_entry)
> int
> test(void)
> {
> - unsigned long offset;
> + unsigned long offset, offset2;
> unsigned long size;
> unsigned long rv;
> unsigned long op;
> @@ -1469,6 +1565,7 @@ test(void)
> op = log_entry.operation;
> offset = log_entry.args[0];
> size = log_entry.args[1];
> + offset2 = log_entry.args[2];
> closeopen = !!(log_entry.flags & FL_CLOSE_OPEN);
> keep_size = !!(log_entry.flags & FL_KEEP_SIZE);
> goto have_op;
> @@ -1481,6 +1578,7 @@ test(void)
> closeopen = (rv >> 3) < (1 << 28) / closeprob;
>
> offset = random();
> + offset2 = 0;
> size = maxoplen;
> if (randomoplen)
> size = random() % (maxoplen + 1);
> @@ -1506,6 +1604,17 @@ test(void)
> if (zero_range_calls && size && keep_size_calls)
> keep_size = random() % 2;
> break;
> + case OP_CLONE_RANGE:
> + TRIM_OFF_LEN(offset, size, file_size);
> + offset = offset & ~(block_size - 1);
> + size = size & ~(block_size - 1);
> + do {
> + offset2 = random();
> + TRIM_OFF(offset2, maxfilelen);
> + offset2 = offset2 & ~(block_size - 1);
> + } while (llabs(offset2 - offset) < size ||
> + offset2 + size > maxfilelen);
> + break;
> }
>
> have_op:
> @@ -1549,6 +1658,12 @@ test(void)
> goto out;
> }
> break;
> + case OP_CLONE_RANGE:
> + if (!remap_calls) {
> + log5(op, offset, size, offset2, FL_SKIPPED);
> + goto out;
> + }
> + break;
> }
>
> switch (op) {
> @@ -1615,6 +1730,18 @@ test(void)
>
> do_insert_range(offset, size);
> break;
> + case OP_CLONE_RANGE:
> + if (size == 0) {
> + log5(OP_CLONE_RANGE, offset, size, offset2, FL_SKIPPED);
> + goto out;
> + }
> + if (offset2 + size > maxfilelen) {
> + log5(OP_CLONE_RANGE, offset, size, offset2, FL_SKIPPED);
> + goto out;
> + }
> +
> + do_clone_range(offset, size, offset2);
> + break;
> case OP_FSYNC:
> dofsync();
> break;
> @@ -1637,7 +1764,7 @@ void
> usage(void)
> {
> fprintf(stdout, "usage: %s",
> - "fsx [-dknqxAFLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
> + "fsx [-dknqxAFJLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
> -b opnum: beginning operation number (default 1)\n\
> -c P: 1 in P chance of file close+open at each op (default infinity)\n\
> -d: debug output for all operations\n\
> @@ -1678,6 +1805,10 @@ usage(void)
> #ifdef FALLOC_FL_INSERT_RANGE
> " -I: Do not use insert range calls\n"
> #endif
> +#if defined(FICLONERANGE) || defined(FIDEDUPERANGE) || \
> + defined(HAVE_COPY_FILE_RANGE)
> +" -J: Do not use clone/dedupe/copy range calls\n"
> +#endif
> " -L: fsxLite - no file creations & no file size changes\n\
> -N numops: total # operations to do (default infinity)\n\
> -O: use oplen (see -o flag) for every op (default random)\n\
> @@ -2010,6 +2141,9 @@ main(int argc, char **argv)
> case 'I':
> insert_range_calls = 0;
> break;
> + case 'J':
> + remap_calls = 0;
> + break;
> case 'L':
> lite = 1;
> o_flags &= ~(O_CREAT|O_TRUNC);
>
