Dear list, spending some time in evaluating the current state of the 6lowpan support for Raspberry PIs in order to use it together with Eclipse/Californium CoAP/DTLS (I'm a committer in that project), I found a lot using an external modules. But I'm wondering, if there is any native support for a Raspberry PI 3B+ with a CYW43455. According articles as: https://www.linux-magazine.com/Issues/2018/212/Raspberry-Pi-3-B/(offset)/3/(tagID)/383 "Bluetooth 4.2 takes this to a whole new level: The IPSP-supported 6LoWPAN (Internet Protocol Support Profile/IPv6 over low-power wireless personal area networks) takes IPv6 to small, low-performance devices for integration into the Internet of Things." it seems to be possible for the hardware, but I could not find hints, that it is working with the software. According https://linux-wpan.org/hardware it's not listed, but the nrf52840 is also not listed (but working with the openthread setup from nordic). So: Does someone have tried to use a Raspberry PI 3B+ native CYW43455 for 6lowpan? best regards Achim Kraus
