Hi, 2017-08-03 2:59 GMT-04:00 Stefan Schmidt <stefan@xxxxxxxxxxxxxxx>: ... > > To be honest I would first want to verify that your communication between > the atusb driver and the firmware is actually working correctly. > > If you flashed a unmodified rzusb firmware on the device you would have to > be very lucky that everything would just work out of the box. If this design > uses the same MCU it would help a lot (please confirm) but the state > handling of the rx/tx logic inside the firmware might still be slightly > different for the 212 compared top the 230/231. The actual 212 kernel driver > might give some hints about that. I do not know off hand. > Please take care of Errata of at86rf212 [0]. The reset doesn't work you need to change to TRX_OFF after reset... something like that. Not sure if atusb firmware really does that. But this is more just like that... set CLKM stuff etc. Simple see workaround at [0]. - Alex [0] http://www.atmel.com/images/doc8168.pdf -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
