Hi all, I'm using 2 lowpan transceivers on a Raspberry Pi namely openlabs at86rf233 and microchip mrf24j40ma. I found that the latter one seams to be somewhat _incomplete_, that is it doesn't support handles for _reset_ and _wake/sleep_ gpio-pin configuration. Further, this makes connecting the mrf24j40ma to the RasPi pinout inconvenient (IMHO). On the other hand the atmel driver (at86rf230)[1] does support these functions, so I'd like to _port_ the reset and sleep functionality into the mrf24j40 driver[2]. Is anybody working on this, and if not: do you think it is useful/worth while doing so? I'm willing to work on that and implement these extension, maybe also restructure/clean up the driver code a little bit in this process. So any thoughts on this and/or hints, comments ... Thanks, best Sebastian [1]: http://git.kernel.org/cgit/linux/kernel/git/bluetooth/bluetooth-next.git/tree/drivers/net/ieee802154/at86rf230.c [2]: http://git.kernel.org/cgit/linux/kernel/git/bluetooth/bluetooth-next.git/tree/drivers/net/ieee802154/mrf24j40.c-- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
