Hello.
On 16/11/15 15:46, Stefan Schmidt wrote:
There is at least one 802.15.4 IP block out there that markets the
support for dual PAN ID.
http://www.freescale.com/products/arm-processors/kinetis-cortex-m/w-series/kinetis-kw2x-2.4-ghz-rf-analog-mixed-signal-ieee-802.15.4-low-power-microcontrollers-mcus:KW2x
So far this is only inside a wireless mcu combination and thus
unrealted to us but maybe the IP block will be used in some other
hardware later.
What I don't know is how this functionality is exposed by the
hardware. Would it only have a few extra regs needed for the dual PAN
setup or two full register sets? Would it have different regs for the
two sets of address filters? Allowing to have the two PANs on
different channels or only on one?
I just browsed to the data sheat to understand what they will provide
and it boils down to regs for channel, short address, extended address,
PAN ID and coordinator bit. A timer can be configured by software and/or
driven by the hardware directly as to when switch between these two.
regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
