Hi,
Here is how I set the network:
modprobe at86rf230
iwpan dev wpan0 set pan_id 0xbeef
ip link set wpan0 up
ip link add link wpan0 name lowpan0 type lowpan
ip link set lowpan0 up
Then I try to do:
ping6 -I lowpan0 fe80::a8af:ac69:e53e:c7f1
Nothing is sent. (I checked by sniffing the SPI pins). No errors from
ping6 or other layers in the network stack.
root@OpenWrt:/# ifconfig
lowpan0 Link encap:UNSPEC HWaddr
05-38-09-06-90-E0-5E-3E-00-00-00-00-00-00-00-00
inet6 addr: fe80::738:906:90e0:5e3e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1280 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wpan0 Link encap:UNSPEC HWaddr
05-38-09-06-90-E0-5E-3E-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING NOARP MTU:127 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:300
RX bytes:0 (0.0 B) TX bytes:75 (75.0 B)
(TX bytes:75 (75.0 B), seems to be sent when you up lowpan0 ?)
Is my settings right? What should I check to make sure the data goes
from each layer of the network stack?
Regards,
--
Baptiste
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
