Hello.
On 12/12/14 00:11, Andrey Yurovsky wrote:
From: Andrey Yurovsky <yurovsky@xxxxxxxxx>
This version check allows the driver to only work with v1 hardware
however there is no driver-facing difference with newer versions
(confirmed by Atmel FAEs) so this check needlessly prevents the driver
from being used with radios now in production.
Has anyone tested the driver with this new hardware yet? Or are the
productions so early that there are now samples yet?
Signed-off-by: Andrey Yurovsky <yurovsky@xxxxxxxxx>
---
drivers/net/ieee802154/at86rf230.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ieee802154/at86rf230.c
b/drivers/net/ieee802154/at86rf230.c
index 1c01356..007470f 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1429,16 +1429,12 @@ at86rf230_detect_device(struct at86rf230_local
*lp)
break;
case 7:
chip = "at86rf212";
- if (version == 1) {
- lp->data = &at86rf212_data;
- lp->hw->flags |= IEEE802154_HW_LBT;
- lp->hw->phy->channels_supported[0] = 0x00007FF;
- lp->hw->phy->channels_supported[2] = 0x00007FF;
- lp->hw->phy->current_channel = 5;
- lp->hw->phy->symbol_duration = 25;
- } else {
- rc = -ENOTSUPP;
- }
+ lp->data = &at86rf212_data;
+ lp->hw->flags |= IEEE802154_HW_LBT;
+ lp->hw->phy->channels_supported[0] = 0x00007FF;
+ lp->hw->phy->channels_supported[2] = 0x00007FF;
+ lp->hw->phy->current_channel = 5;
+ lp->hw->phy->symbol_duration = 25;
break;
case 11:
chip = "at86rf233";
Change looks good.
Reviewed-by: Stefan Schmidt <s.schmidt@xxxxxxxxxxx>
regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
