Hi Eddie, > Here is the output of /sys/kernel/debug/ieee80211/phy0/ht40allow_map: Ok, thanks. > 2412 HT40 + > 2417 HT40 + > 2422 HT40 + > 2427 HT40 + > 2432 HT40 -+ > 2437 HT40 -+ > 2442 HT40 -+ > 2447 HT40 - > 2452 HT40 - > 2457 HT40 - > 2462 HT40 - > 2467 HT40 > 2472 HT40 > 2484 HT40 That looks correct. > and "iw reg get" says: > > country 00: > (2402 - 2472 @ 40), (6, 20) > (2457 - 2482 @ 20), (6, 20), PASSIVE-SCAN, NO-IBSS > (2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS > (5170 - 5250 @ 40), (6, 20), PASSIVE-SCAN, NO-IBSS > (5735 - 5835 @ 40), (6, 20), PASSIVE-SCAN, NO-IBSS > (57240 - 63720 @ 2160), (N/A, 0) That also looks fine. > I captured both of these with the HT20/HT40 patch applied. Ok, that shouldn't change anything in this case, but good to know. > let me know if you need anything else. Yeah, I forgot to ask about the AP. Can you show the output of "iw wlan0 scan dump" for your AP while you're connected? It should show something like this (note the "associated" indication): BSS 02:00:00:00:00:00 (on wlan1) -- associated TSF: 1352188517669470 usec (15650d, 07:55:17) freq: 2432 [...] I'm particularly interested in the "freq" (as above) and the HT capabilities/operation information. johannes -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
