Search Linux Wireless

Any thoughts on how to best shield u.fl connectors on NICs?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It appears hard to get well-shielded u.fl (IPEX) to SMA pigtails, and all of the
modern ath9k NICs I've seen use u.fl connectors on the NIC.

I have found a vendor that will do double-shielded 1.32mm cable, and I have some of those
on order, but the way u.fl connectors are made it seems there is always a bit of un-shielded
cable where the connector is crimped onto the cable.

I am curious if anyone has any suggestions or experience with connecting u.fl NICs to
SMA cables in a highly shielded manner...

Thanks,
Ben

--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc  http://www.candelatech.com

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux