From: Alan Cox <alan@xxxxxxxxxxxxxxx> This code seems to make no sense otherwise for 5MHz mode as it always recomputes the values in the fall through. [ath5k_hw_set_opmode looks suspicious too btw] Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath5k/phy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 01c90ed..ab363f3 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1975,11 +1975,13 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, spur_delta_phase = (spur_offset << 18) / 25; spur_freq_sigma_delta = (spur_delta_phase >> 10); symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 2; + break; case AR5K_BWMODE_5MHZ: /* Both sample_freq and chip_freq are 10MHz (?) */ spur_delta_phase = (spur_offset << 19) / 25; spur_freq_sigma_delta = (spur_delta_phase >> 10); symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4; + break; default: if (channel->band == IEEE80211_BAND_5GHZ) { /* Both sample_freq and chip_freq are 40MHz */ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html