Hi Gertjan, On Sunday 26 August 2012 21:21:05 Gertjan van Wingerde wrote: > Hi Maxi, > > On 08/26/12 15:33, Maximilian Engelhardt wrote: > > Hallo, > > > > I recently bought an Asus USB-N53 Dual Band Wireless Network Adapter and > > noticed that I have to enable CONFIG_RT2800USB_UNKNOWN to get it working. > > With this option enabled everything is working fine as far as I have > > tested. > > > > So I'd line to get things right and move this device out of > > CONFIG_RT2800USB_UNKNOWN to where it belongs. > > Thanks for identifying the adapter. Moving it out of > CONFIG_RT2800USB_UNKNOWN is definitely the way to go. > > > Here is the information I have about this device, feel tree to ask if you > > need anything addition. > > > > Asus Website about the device: > > http://www.asus.com/Networks/Wireless_Adapters/USBN53/ > > > > output of lsusb: > > Bus 005 Device 013: ID 0b05:179d ASUSTek Computer, Inc. USB-N53 802.11abgn > > Network Adapter [Ralink RT3572] > > > > output of dmesg: > > usb 5-6: new high-speed USB device number 13 using ehci_hcd > > usb 5-6: New USB device found, idVendor=0b05, idProduct=179d > > usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > usb 5-6: Product: 802.11 n WLAN > > usb 5-6: Manufacturer: Ralink > > usb 5-6: SerialNumber: 1.0 > > usb 5-6: reset high-speed USB device number 13 using ehci_hcd > > ieee80211 phy6: Selected rate control algorithm 'minstrel_ht' > > Registered led device: rt2800usb-phy6::radio > > Registered led device: rt2800usb-phy6::assoc > > Registered led device: rt2800usb-phy6::quality > > > > > > So according to lsusb this is a RT3572 device, which does also match with > > the chip description from ralink: > > http://www.ralinktech.com/en/02_products/product.php?sn=1009 > > > > I suggest moving the device to the CONFIG_RT2800USB_RT35XX section in > > rt2800usb.c, see attached patch. > > We need a proper Signed-off-by line from you in accordance with the > patch submission procedures. I can pick up your patch, add your > Signed-off-by, and submit it for inclusion upstream, but you have to > confirm that you are OK with me adding your Signed-off-by to the patch. Here you go. Signed-off-by: Maximilian Engelhardt <maxi@xxxxxxxxxxxxx> > > diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c > > b/drivers/net/wireless/rt2x00/rt2800usb.c index 6cf3365..6681bfc 100644 > > --- a/drivers/net/wireless/rt2x00/rt2800usb.c > > +++ b/drivers/net/wireless/rt2x00/rt2800usb.c > > @@ -1157,6 +1157,8 @@ static struct usb_device_id rt2800usb_device_table[] > > = {> > > { USB_DEVICE(0x1690, 0x0744) }, > > { USB_DEVICE(0x1690, 0x0761) }, > > { USB_DEVICE(0x1690, 0x0764) }, > > > > + /* ASUS */ > > + { USB_DEVICE(0x0b05, 0x179d) }, > > > > /* Cisco */ > > { USB_DEVICE(0x167b, 0x4001) }, > > /* EnGenius */ > > > > @@ -1222,7 +1224,6 @@ static struct usb_device_id rt2800usb_device_table[] > > = {> > > { USB_DEVICE(0x0b05, 0x1760) }, > > { USB_DEVICE(0x0b05, 0x1761) }, > > { USB_DEVICE(0x0b05, 0x1790) }, > > > > - { USB_DEVICE(0x0b05, 0x179d) }, > > > > /* AzureWave */ > > { USB_DEVICE(0x13d3, 0x3262) }, > > { USB_DEVICE(0x13d3, 0x3284) }, > > --- > Gertjan Thanks for your help.
Attachment:
signature.asc
Description: This is a digitally signed message part.
