Getting ASUS USB-N53 out of CONFIG_RT2800USB_UNKNOWN

[Maximilian Engelhardt <maxi@xxxxxxxxxxxxx>]

Hallo,

I recently bought an Asus USB-N53 Dual Band Wireless Network Adapter and 
noticed that I have to enable CONFIG_RT2800USB_UNKNOWN to get it working. With 
this option enabled everything is working fine as far as I have tested.

So I'd line to get things right and move this device out of 
CONFIG_RT2800USB_UNKNOWN to where it belongs.


Here is the information I have about this device, feel tree to ask if you need 
anything addition.

Asus Website about the device:
http://www.asus.com/Networks/Wireless_Adapters/USBN53/

output of lsusb:
Bus 005 Device 013: ID 0b05:179d ASUSTek Computer, Inc. USB-N53 802.11abgn 
Network Adapter [Ralink RT3572]

output of dmesg:
usb 5-6: new high-speed USB device number 13 using ehci_hcd
usb 5-6: New USB device found, idVendor=0b05, idProduct=179d
usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-6: Product: 802.11 n WLAN
usb 5-6: Manufacturer: Ralink
usb 5-6: SerialNumber: 1.0
usb 5-6: reset high-speed USB device number 13 using ehci_hcd
ieee80211 phy6: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy6::radio
Registered led device: rt2800usb-phy6::assoc
Registered led device: rt2800usb-phy6::quality


So according to lsusb this is a RT3572 device, which does also match with the 
chip description from ralink: 
http://www.ralinktech.com/en/02_products/product.php?sn=1009

I suggest moving the device to the CONFIG_RT2800USB_RT35XX section in 
rt2800usb.c, see attached patch.


diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6cf3365..6681bfc 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1157,6 +1157,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
        { USB_DEVICE(0x1690, 0x0744) },
        { USB_DEVICE(0x1690, 0x0761) },
        { USB_DEVICE(0x1690, 0x0764) },
+       /* ASUS */
+       { USB_DEVICE(0x0b05, 0x179d) },
        /* Cisco */
        { USB_DEVICE(0x167b, 0x4001) },
        /* EnGenius */
@@ -1222,7 +1224,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
        { USB_DEVICE(0x0b05, 0x1760) },
        { USB_DEVICE(0x0b05, 0x1761) },
        { USB_DEVICE(0x0b05, 0x1790) },
-       { USB_DEVICE(0x0b05, 0x179d) },
        /* AzureWave */
        { USB_DEVICE(0x13d3, 0x3262) },
        { USB_DEVICE(0x13d3, 0x3284) },


Greeting,
Maxi

Attachment: signature.asc
Description: This is a digitally signed message part.