Search Linux Wireless

Re: AR9330 hornet board stops beaconing after a few days (0xdeadbeef)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 23 August 2012 17:19:45 Sven Eckelmann wrote:
> On Thursday 23 August 2012 20:29:47 Mohammed Shafi wrote:
> > >> just to bump again - isn't there anyone who can give us some hint or
> > >> clue regarding these 0xdeadbeef entries in the registers? Couldn't find
> > >> a connection to other reports deadbeef on the mailing list so far.
> > > 
> > > based on the suggestion from Felix Bitterli he says the deadbeef is
> > > due to clocks
> > > of MAC/baseband is off. Adrian says dumping RTC registers might
> > > provide some clue
> > > 
> > > today evening i would just take a look at some h/w specific changes
> > > that were still yet to be in ath9k.
> > 
> > sorry, i am unable to figure out any commits that seems to fix the
> > symptoms
> > like this. i will dig through or ask some one internally.
> > please check with the logs sudo modprobe -v ath9k debug=0x8601
> > with beacon stuck debug enabled
> 
> We have currently the debug running with 0xFFC2D (so also with BS detection
> enabled) since a while. Unfortunately, it takes some days until the problem
> appears and we don't know how to force it to happen immediately.

Ah, sorry. Just noticed that you also wanted to have ATH_DBG_CONFIG enabled. 
Therefore, I changed it to 0xFFE2D right now.

Kind regards,
	Sven

Attachment: signature.asc
Description: This is a digitally signed message part.


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux