The removed workarounds are already performed in bcma_pmu_workarounds()
and bcma_core_chipcommon_init()
This patch depends on the completion of the workarounds in bcma done in
this commit in my pending patch series for bcma.
Author: Hauke Mehrtens <hauke@xxxxxxxxxx>
Date: Mon Jun 4 00:20:26 2012 +0200
bcma: complete workaround for BCMA43224 and BCM4313
Acked-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmsmac/aiutils.c | 42 ---------------------
1 file changed, 42 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index c15d9fc..8c9345d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -476,11 +476,7 @@ static struct si_info *ai_doattach(struct si_info *sii,
struct bcma_bus *pbus)
{
struct si_pub *sih = &sii->pub;
- u32 w, savewin;
struct bcma_device *cc;
- struct ssb_sprom *sprom = &pbus->sprom;
-
- savewin = 0;
sii->icbus = pbus;
sii->pcibus = pbus->host_pci;
@@ -506,44 +502,6 @@ static struct si_info *ai_doattach(struct si_info *sii,
(void)si_pmu_measure_alpclk(sih);
}
- /* setup the GPIO based LED powersave register */
- w = (sprom->leddc_on_time << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
- (sprom->leddc_off_time << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT);
- if (w == 0)
- w = DEFAULT_GPIOTIMERVAL;
- ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval),
- ~0, w);
-
- if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) {
- /*
- * enable 12 mA drive strenth for 43224 and
- * set chipControl register bit 15
- */
- if (ai_get_chiprev(sih) == 0) {
- SI_MSG("Applying 43224A0 WARs\n");
- ai_cc_reg(sih, offsetof(struct chipcregs, chipcontrol),
- CCTRL43224_GPIO_TOGGLE,
- CCTRL43224_GPIO_TOGGLE);
- si_pmu_chipcontrol(sih, 0, CCTRL_43224A0_12MA_LED_DRIVE,
- CCTRL_43224A0_12MA_LED_DRIVE);
- }
- if (ai_get_chiprev(sih) >= 1) {
- SI_MSG("Applying 43224B0+ WARs\n");
- si_pmu_chipcontrol(sih, 0, CCTRL_43224B0_12MA_LED_DRIVE,
- CCTRL_43224B0_12MA_LED_DRIVE);
- }
- }
-
- if (ai_get_chip_id(sih) == BCM4313_CHIP_ID) {
- /*
- * enable 12 mA drive strenth for 4313 and
- * set chipControl register bit 1
- */
- SI_MSG("Applying 4313 WARs\n");
- si_pmu_chipcontrol(sih, 0, CCTRL_4313_12MA_LED_DRIVE,
- CCTRL_4313_12MA_LED_DRIVE);
- }
-
return sii;
exit:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
