si_pmu_spuravoid_pllupdate() is now replaced by
bcma_pmu_spuravoid_pllupdate() which does the same thing, but supports
more chips.
This function is in my pending patch series for bcma.
Author: Hauke Mehrtens <hauke@xxxxxxxxxx>
Date: Mon Jun 4 01:31:32 2012 +0200
bcma: add bcma_pmu_spuravoid_pllupdate()
Acked-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmsmac/phy/phy_n.c | 3 +-
drivers/net/wireless/brcm80211/brcmsmac/pmu.c | 84 --------------------
drivers/net/wireless/brcm80211/brcmsmac/pmu.h | 1 -
3 files changed, 2 insertions(+), 86 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
index 3667181..a4ae93e 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
@@ -21106,6 +21106,7 @@ wlc_phy_chanspec_nphy_setup(struct brcms_phy *pi, u16 chanspec,
const struct nphy_sfo_cfg *ci)
{
u16 val;
+ struct si_info *sii = container_of(pi->sh->sih, struct si_info, pub);
val = read_phy_reg(pi, 0x09) & NPHY_BandControl_currentBand;
if (CHSPEC_IS5G(chanspec) && !val) {
@@ -21189,7 +21190,7 @@ wlc_phy_chanspec_nphy_setup(struct brcms_phy *pi, u16 chanspec,
spuravoid = 1;
wlapi_bmac_core_phypll_ctl(pi->sh->physhim, false);
- si_pmu_spuravoid_pllupdate(pi->sh->sih, spuravoid);
+ bcma_pmu_spuravoid_pllupdate(&sii->icbus->drv_cc, spuravoid);
wlapi_bmac_core_phypll_ctl(pi->sh->physhim, true);
if ((pi->sh->chip == BCM43224_CHIP_ID) ||
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
index 045f43a..6b4344f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
@@ -74,16 +74,6 @@
* PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary
* number to differentiate different PLLs controlled by the same PMU rev.
*/
-/* pllcontrol registers:
- * ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>,
- * p1div, p2div, _bypass_sdmod
- */
-#define PMU1_PLL0_PLLCTL0 0
-#define PMU1_PLL0_PLLCTL1 1
-#define PMU1_PLL0_PLLCTL2 2
-#define PMU1_PLL0_PLLCTL3 3
-#define PMU1_PLL0_PLLCTL4 4
-#define PMU1_PLL0_PLLCTL5 5
/* pmu XtalFreqRatio */
#define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF
@@ -108,80 +98,6 @@
#define RES4313_HT_AVAIL_RSRC 14
#define RES4313_MACPHY_CLK_AVAIL_RSRC 15
-void si_pmu_spuravoid_pllupdate(struct si_pub *sih, u8 spuravoid)
-{
- u32 tmp = 0;
- struct si_info *sii = container_of(sih, struct si_info, pub);
- struct bcma_device *core;
-
- /* switch to chipc */
- core = sii->icbus->drv_cc.core;
-
- switch (ai_get_chip_id(sih)) {
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- if (spuravoid == 1) {
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL0);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x11500010);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL1);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x000C0C06);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL2);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x0F600a08);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL3);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x00000000);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL4);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x2001E920);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL5);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x88888815);
- } else {
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL0);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x11100010);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL1);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x000c0c06);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL2);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x03000a08);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL3);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x00000000);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL4);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x200005c0);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
- PMU1_PLL0_PLLCTL5);
- bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
- 0x88888815);
- }
- tmp = 1 << 10;
- break;
-
- default:
- /* bail out */
- return;
- }
-
- bcma_set32(core, CHIPCREGOFFS(pmucontrol), tmp);
-}
-
u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
{
uint delay = PMU_MAX_TRANSITION_DLY;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.h b/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
index 2f0ad28..f7cff87 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
@@ -26,7 +26,6 @@ extern u32 si_pmu_chipcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
extern u32 si_pmu_regcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
extern u32 si_pmu_alp_clock(struct si_pub *sih);
extern void si_pmu_pllupd(struct si_pub *sih);
-extern void si_pmu_spuravoid_pllupdate(struct si_pub *sih, u8 spuravoid);
extern u32 si_pmu_pllcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
extern u32 si_pmu_measure_alpclk(struct si_pub *sih);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
