On Fri, 2012-06-15 at 08:18 +0200, Andreas Kemnade wrote: > Hi, > > On Thu, 14 Jun 2012 09:11:06 -0700 (PDT) > hong zhang <henryzhang62@xxxxxxxxx> wrote: > > > bit mode and interrupt or PIO are configured in SDIO hoster side. > > Not in driver side. > > > yes, I wrote the last email just to say that I have found something to look at. > That is of course in the host driver. So the thing I did was reading > commit logs of the 2.6.32 kernel working well. > > The only thing which puzzles me is the 5.5Mb/s data rate iwconfig shows. > After playing with the host side driver, it also shows higher rates. But > why does host driver affects *that* data rate of link qualitiy is good? As said, that's the WiFi air link rate which is determined by the firmware based on the link quality with the AP, on things like RSSI, missed beacons, TX/RX errors, etc. That's not the SDIO data rate which is completely independent. Dan -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
