After a full reset, mci_reset will put LNA update to the setting
for 2G mode. Those registers need to be forced to update when
the channel is in 5G.
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 24 +++++++++---------------
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 2 +-
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
3 files changed, 11 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index cbeff9c..c11dbaa 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1013,38 +1013,32 @@ static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header,
}
}
-void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
+void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
- if (!mci->update_2g5g)
+ if (!mci->update_2g5g && !force)
return;
if (mci->is_2g) {
ar9003_mci_send_2g5g_status(ah, true);
- ar9003_mci_send_lna_transfer(ah, true);
- udelay(5);
- REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL,
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
- REG_SET_BIT(ah, AR_BTCOEX_CTRL,
- AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ ar9003_mci_osla_setup(ah, true);
} else {
- ar9003_mci_send_lna_take(ah, true);
- udelay(5);
-
REG_SET_BIT(ah, AR_MCI_TX_CTRL,
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
- REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
- AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
- ar9003_mci_send_2g5g_status(ah, true);
+ ar9003_mci_osla_setup(ah, false);
+ if (!force)
+ ar9003_mci_send_2g5g_status(ah, true);
}
}
@@ -1313,7 +1307,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
if (mci->unhalt_bt_gpm)
ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
- ar9003_mci_2g5g_switch(ah, true);
+ ar9003_mci_2g5g_switch(ah, false);
break;
case MCI_STATE_SET_BT_CAL_START:
mci->bt_state = MCI_BT_CAL_START;
@@ -1394,7 +1388,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
mci->query_bt = true;
mci->need_flush_btinfo = true;
ar9003_mci_send_coex_wlan_channels(ah, true);
- ar9003_mci_2g5g_switch(ah, true);
+ ar9003_mci_2g5g_switch(ah, false);
break;
case MCI_STATE_NEED_FTP_STOMP:
value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index 45624e1..8cb3307 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -276,7 +276,7 @@ void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep);
void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable);
void ar9003_mci_init_cal_done(struct ath_hw *ah);
void ar9003_mci_set_full_sleep(struct ath_hw *ah);
-void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force);
void ar9003_mci_check_bt(struct ath_hw *ah);
bool ar9003_mci_start_reset(struct ath_hw *ah, struct ath9k_channel *chan);
int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8412128..a9d328c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1711,7 +1711,7 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan)
ath9k_hw_start_nfcal(ah, true);
if (ath9k_hw_mci_is_enabled(ah))
- ar9003_mci_2g5g_switch(ah, true);
+ ar9003_mci_2g5g_switch(ah, false);
if (AR_SREV_9271(ah))
ar9002_hw_load_ani_reg(ah, chan);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
