The HW statemachine is sometimes found stuck in the state
WL_LNA_CTRL_DISABLE when BT is in sleep, which will cause
TX_HOLD always asserted and resmgr stuck in PENDING_TX state
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 34 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 10 ++++++--
drivers/net/wireless/ath/ath9k/hw.c | 3 +++
3 files changed, 45 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index b1ced2a..13907f6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1404,3 +1404,37 @@ void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
/* Force another 2g5g update at next scanning */
mci->update_2g5g = true;
}
+
+void ar9003_mci_set_power_awake(struct ath_hw *ah)
+{
+ u32 btcoex_ctrl2, diag_sw;
+ int i;
+ u8 lna_ctrl, bt_sleep;
+
+ for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
+ btcoex_ctrl2 = REG_READ(ah, AR_BTCOEX_CTRL2);
+ if (btcoex_ctrl2 != 0xdeadbeef)
+ break;
+ udelay(AH_TIME_QUANTUM);
+ }
+ REG_WRITE(ah, AR_BTCOEX_CTRL2, (btcoex_ctrl2 | BIT(23)));
+
+ for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
+ diag_sw = REG_READ(ah, AR_DIAG_SW);
+ if (diag_sw != 0xdeadbeef)
+ break;
+ udelay(AH_TIME_QUANTUM);
+ }
+ REG_WRITE(ah, AR_DIAG_SW, (diag_sw | BIT(27) | BIT(19) | BIT(18)));
+ lna_ctrl = REG_READ(ah, AR_OBS_BUS_CTRL) & 0x3;
+ bt_sleep = REG_READ(ah, AR_MCI_RX_STATUS) & AR_MCI_RX_REMOTE_SLEEP;
+
+ REG_WRITE(ah, AR_BTCOEX_CTRL2, btcoex_ctrl2);
+ REG_WRITE(ah, AR_DIAG_SW, diag_sw);
+
+ if (bt_sleep && (lna_ctrl == 2)) {
+ REG_SET_BIT(ah, AR_BTCOEX_RC, 0x1);
+ REG_CLR_BIT(ah, AR_BTCOEX_RC, 0x1);
+ udelay(50);
+ }
+}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index 10282e2..2a8c764 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -265,8 +265,6 @@ void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
void ar9003_mci_cleanup(struct ath_hw *ah);
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
u32 *rx_msg_intr);
-void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah);
-
/*
* These functions are used by ath9k_hw.
*/
@@ -285,6 +283,8 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
bool is_full_sleep);
void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked);
+void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah);
+void ar9003_mci_set_power_awake(struct ath_hw *ah);
#else
@@ -322,6 +322,12 @@ static inline void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
static inline void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
{
}
+static inline void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
+{
+}
+static inline void ar9003_mci_set_power_awake(struct ath_hw *ah)
+{
+}
#endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
#endif
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 45e6700..6d89333 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2111,6 +2111,9 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah)
AR_RTC_FORCE_WAKE_EN);
udelay(50);
+ if (ath9k_hw_mci_is_enabled(ah))
+ ar9003_mci_set_power_awake(ah);
+
for (i = POWER_UP_TIME / 50; i > 0; i--) {
val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
if (val == AR_RTC_STATUS_ON)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
