Add the missing kernel-doc for mesh configuration parameters as pointed
out by Johannes Berg.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@xxxxxxxxx>
---
include/net/cfg80211.h | 59 +++++++++++++++++++++++++++++++++++++++--------
1 files changed, 49 insertions(+), 10 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7319f25..a129ee2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -790,26 +790,69 @@ struct bss_parameters {
int ht_opmode;
};
-/*
+/**
* struct mesh_config - 802.11s mesh configuration
*
* These parameters can be changed while the mesh is active.
+ *
+ * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
+ * by the Mesh Peering Open message
+ * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
+ * used by the Mesh Peering Open message
+ * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
+ * the mesh peering management to close a mesh peering
+ * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
+ * mesh interface
+ * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
+ * be sent to establish a new peer link instance in a mesh
+ * @dot11MeshTTL: the value of TTL field set at a source mesh STA
+ * @element_ttl: the value of TTL field set at a mesh STA for path selection
+ * elements
+ * @auto_open_plinks: whether we should automatically open peer links when we
+ * detect compatible mesh peers
+ * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
+ * synchronize to for 11s default synchronization method
+ * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
+ * that an originator mesh STA can send to a particular path target
+ * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
+ * @min_discovery_timeout: the minimum length of time to wait until giving up on
+ * a path discovery in milliseconds
+ * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
+ * receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
+ * which a mesh STA can send only one action frame containing a PREQ
+ * element
+ * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
+ * which a mesh STA can send only one Action frame containing a PERR
+ * element
+ * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
+ * it takes for an HWMP information element to propagate across the mesh
+ * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
+ * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
+ * announcements are transmitted
+ * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
+ * station has access to a broader network beyond the MBSS. (This is
+ * missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
+ * only means that the station will announce others it's a mesh gate, but
+ * not necessarily using the gate announcement protocol. Still keeping the
+ * same nomenclature to be in sync with the spec)
+ * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
+ * entity (default is TRUE - forwarding entity)
+ * @rssi_threshold: the threshold for average signal strength of candidate
+ * station to establish a peer link
+ * @ht_opmode: mesh HT protection mode
*/
struct mesh_config {
- /* Timeouts in ms */
- /* Mesh plink management parameters */
u16 dot11MeshRetryTimeout;
u16 dot11MeshConfirmTimeout;
u16 dot11MeshHoldingTimeout;
u16 dot11MeshMaxPeerLinks;
u8 dot11MeshMaxRetries;
u8 dot11MeshTTL;
- /* ttl used in path selection information elements */
u8 element_ttl;
bool auto_open_plinks;
- /* neighbor offset synchronization */
u32 dot11MeshNbrOffsetMaxNeighbor;
- /* HWMP parameters */
u8 dot11MeshHWMPmaxPREQretries;
u32 path_refresh_time;
u16 min_discovery_timeout;
@@ -819,10 +862,6 @@ struct mesh_config {
u16 dot11MeshHWMPnetDiameterTraversalTime;
u8 dot11MeshHWMPRootMode;
u16 dot11MeshHWMPRannInterval;
- /* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
- * set to true only means that the station will announce others it's a
- * mesh gate, but not necessarily using the gate announcement protocol.
- * Still keeping the same nomenclature to be in sync with the spec. */
bool dot11MeshGateAnnouncementProtocol;
bool dot11MeshForwarding;
s32 rssi_threshold;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
