After a full reset, mci_reset will put LNA update to the setting for 2G mode. Those registers need to be forced to update when the channel is in 5G. Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_mci.c | 24 +++++++++--------------- drivers/net/wireless/ath/ath9k/ar9003_mci.h | 2 +- drivers/net/wireless/ath/ath9k/hw.c | 2 +- 3 files changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index 96a8a5f..5097ed8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -1013,38 +1013,32 @@ static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header, } } -void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done) +void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force) { struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci; - if (!mci->update_2g5g) + if (!mci->update_2g5g && !force) return; if (mci->is_2g) { ar9003_mci_send_2g5g_status(ah, true); - ar9003_mci_send_lna_transfer(ah, true); - udelay(5); - REG_CLR_BIT(ah, AR_MCI_TX_CTRL, + REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE); REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL, AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL); if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) - REG_SET_BIT(ah, AR_BTCOEX_CTRL, - AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN); + ar9003_mci_osla_setup(ah, true); } else { - ar9003_mci_send_lna_take(ah, true); - udelay(5); - REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE); REG_SET_BIT(ah, AR_PHY_GLB_CONTROL, AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL); - REG_CLR_BIT(ah, AR_BTCOEX_CTRL, - AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN); - ar9003_mci_send_2g5g_status(ah, true); + ar9003_mci_osla_setup(ah, false); + if (!force) + ar9003_mci_send_2g5g_status(ah, true); } } @@ -1313,7 +1307,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data) if (mci->unhalt_bt_gpm) ar9003_mci_send_coex_halt_bt_gpm(ah, false, true); - ar9003_mci_2g5g_switch(ah, true); + ar9003_mci_2g5g_switch(ah, false); break; case MCI_STATE_SET_BT_CAL_START: mci->bt_state = MCI_BT_CAL_START; @@ -1394,7 +1388,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data) mci->query_bt = true; mci->need_flush_btinfo = true; ar9003_mci_send_coex_wlan_channels(ah, true); - ar9003_mci_2g5g_switch(ah, true); + ar9003_mci_2g5g_switch(ah, false); break; case MCI_STATE_NEED_FTP_STOMP: value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h index b36c885..8ab082e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h @@ -278,7 +278,7 @@ void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep); void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable); void ar9003_mci_init_cal_done(struct ath_hw *ah); void ar9003_mci_set_full_sleep(struct ath_hw *ah); -void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done); +void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force); void ar9003_mci_check_bt(struct ath_hw *ah); bool ar9003_mci_start_reset(struct ath_hw *ah, struct ath9k_channel *chan); int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e3ccb45..c3bb4a3 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1711,7 +1711,7 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan) ath9k_hw_start_nfcal(ah, true); if (ath9k_hw_mci_is_enabled(ah)) - ar9003_mci_2g5g_switch(ah, true); + ar9003_mci_2g5g_switch(ah, false); if (AR_SREV_9271(ah)) ar9002_hw_load_ani_reg(ah, chan); -- 1.7.10.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html