On Fri, Jun 8, 2012 at 6:08 PM, Johannes Berg <johannes@xxxxxxxxxxxxxxxx> wrote: > On Fri, 2012-06-08 at 18:05 +0200, Andre Heider wrote: >> On Fri, Jun 8, 2012 at 5:59 PM, Johannes Berg <johannes@xxxxxxxxxxxxxxxx> wrote: >> > On Fri, 2012-06-08 at 17:56 +0200, Andre Heider wrote: >> > >> >> > Hopefully this is better: http://p.sipsolutions.net/017d73ac0688f863.txt >> >> >> >> The previous patched all had the mac suspend failure. This one: >> >> >> >> drivers/net/wireless/b43/main.c: In function 'b43_qos_upload_all': >> >> drivers/net/wireless/b43/main.c:3483: error: size of array 'type name' >> >> is negative >> >> drivers/net/wireless/b43/main.c: In function 'b43_qos_clear': >> >> drivers/net/wireless/b43/main.c:3502: error: size of array 'type name' >> >> is negative >> >> drivers/net/wireless/b43/main.c: In function 'b43_op_conf_tx': >> >> drivers/net/wireless/b43/main.c:3578: error: size of array 'type name' >> >> is negative >> > >> > Huh, I thought I compiled it ... guess I had the wrong version. >> > >> > http://p.sipsolutions.net/511dda98892d2c9a.txt >> >> It's getting warmer: >> >> [ 9.456216] b43-phy0: Loading OpenSource firmware version 410.31754 >> [ 9.473798] b43-phy0: Hardware crypto acceleration not supported by firmware >> [ 9.491781] b43-phy0: QoS not supported by firmware >> [ 9.868750] b43-phy0 debug: Chip initialized >> [ 9.888580] b43-phy0 debug: PIO initialized >> [ 9.899273] b43-phy0 debug: QoS disabled >> [ 10.088420] b43-phy0 debug: Wireless interface started >> [ 10.212209] b43-phy0 debug: Adding Interface type 2 >> [ 12.739776] wlan0: authenticate with d8:5d:4c:9c:31:14 >> [ 12.796248] wlan0: send auth to d8:5d:4c:9c:31:14 (try 1/3) >> [ 12.811768] wlan0: authenticated >> [ 12.823310] wlan0: associate with d8:5d:4c:9c:31:14 (try 1/3) >> [ 12.844942] wlan0: RX AssocResp from d8:5d:4c:9c:31:14 (capab=0x411 >> status=0 aid=2) >> [ 12.863966] wlan0: associated >> [ 16.319097] ieee80211 phy0: wlan0: No probe response from AP >> d8:5d:4c:9c:31:14 after 500ms, disconnecting. >> [ 16.349674] cfg80211: Calling CRDA for country: DE >> [ 17.597307] wlan0: authenticate with d8:5d:4c:9c:31:14 >> [ 17.638399] wlan0: send auth to d8:5d:4c:9c:31:14 (try 1/3) >> [ 17.851085] wlan0: send auth to d8:5d:4c:9c:31:14 (try 2/3) >> [ 18.063086] wlan0: send auth to d8:5d:4c:9c:31:14 (try 3/3) >> [ 18.275081] wlan0: authentication with d8:5d:4c:9c:31:14 timed out >> >> Tried it 3 times, always times out. > > So you didn't get the warning, but can you still check what > info->hw_queue is in pio.c? always "1" -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
