This is already done by bcma_pmu_init() and bcma_pmu_resources_init() in bcma.
Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmsmac/aiutils.c | 2 -
drivers/net/wireless/brcm80211/brcmsmac/pmu.c | 76 ---------------------
drivers/net/wireless/brcm80211/brcmsmac/pmu.h | 2 -
3 files changed, 80 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index ca53522..01837fb 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -503,9 +503,7 @@ static struct si_info *ai_doattach(struct si_info *sii,
/* PMU specific initializations */
if (ai_get_cccaps(sih) & CC_CAP_PMU) {
- si_pmu_init(sih);
(void)si_pmu_measure_alpclk(sih);
- si_pmu_res_init(sih);
}
/* setup the GPIO based LED powersave register */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
index 0399a86..045f43a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
@@ -108,37 +108,6 @@
#define RES4313_HT_AVAIL_RSRC 14
#define RES4313_MACPHY_CLK_AVAIL_RSRC 15
-/* Determine min/max rsrc masks. Value 0 leaves hardware at default. */
-static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax)
-{
- u32 min_mask = 0, max_mask = 0;
- uint rsrcs;
-
- /* # resources */
- rsrcs = (ai_get_pmucaps(sih) & PCAP_RC_MASK) >> PCAP_RC_SHIFT;
-
- /* determine min/max rsrc masks */
- switch (ai_get_chip_id(sih)) {
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- /* ??? */
- break;
-
- case BCM4313_CHIP_ID:
- min_mask = PMURES_BIT(RES4313_BB_PU_RSRC) |
- PMURES_BIT(RES4313_XTAL_PU_RSRC) |
- PMURES_BIT(RES4313_ALP_AVAIL_RSRC) |
- PMURES_BIT(RES4313_BB_PLL_PWRSW_RSRC);
- max_mask = 0xffff;
- break;
- default:
- break;
- }
-
- *pmin = min_mask;
- *pmax = max_mask;
-}
-
void si_pmu_spuravoid_pllupdate(struct si_pub *sih, u8 spuravoid)
{
u32 tmp = 0;
@@ -284,51 +253,6 @@ u32 si_pmu_alp_clock(struct si_pub *sih)
return clock;
}
-/* initialize PMU */
-void si_pmu_init(struct si_pub *sih)
-{
- struct si_info *sii = container_of(sih, struct si_info, pub);
- struct bcma_device *core;
-
- /* select chipc */
- core = sii->icbus->drv_cc.core;
-
- if (ai_get_pmurev(sih) == 1)
- bcma_mask32(core, CHIPCREGOFFS(pmucontrol),
- ~PCTL_NOILP_ON_WAIT);
- else if (ai_get_pmurev(sih) >= 2)
- bcma_set32(core, CHIPCREGOFFS(pmucontrol), PCTL_NOILP_ON_WAIT);
-}
-
-/* initialize PMU resources */
-void si_pmu_res_init(struct si_pub *sih)
-{
- struct si_info *sii = container_of(sih, struct si_info, pub);
- struct bcma_device *core;
- u32 min_mask = 0, max_mask = 0;
-
- /* select to chipc */
- core = sii->icbus->drv_cc.core;
-
- /* Determine min/max rsrc masks */
- si_pmu_res_masks(sih, &min_mask, &max_mask);
-
- /* It is required to program max_mask first and then min_mask */
-
- /* Program max resource mask */
-
- if (max_mask)
- bcma_write32(core, CHIPCREGOFFS(max_res_mask), max_mask);
-
- /* Program min resource mask */
-
- if (min_mask)
- bcma_write32(core, CHIPCREGOFFS(min_res_mask), min_mask);
-
- /* Add some delay; allow resources to come up and settle. */
- mdelay(2);
-}
-
u32 si_pmu_measure_alpclk(struct si_pub *sih)
{
struct si_info *sii = container_of(sih, struct si_info, pub);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.h b/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
index 3e39c5e..2f0ad28 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
@@ -28,8 +28,6 @@ extern u32 si_pmu_alp_clock(struct si_pub *sih);
extern void si_pmu_pllupd(struct si_pub *sih);
extern void si_pmu_spuravoid_pllupdate(struct si_pub *sih, u8 spuravoid);
extern u32 si_pmu_pllcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
-extern void si_pmu_init(struct si_pub *sih);
-extern void si_pmu_res_init(struct si_pub *sih);
extern u32 si_pmu_measure_alpclk(struct si_pub *sih);
#endif /* _BRCM_PMU_H_ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
