Some MacBook Pro models with BCM4331 wireless will stop transmitting after resuming from S3 without external power attached. This is fixed by ensuring that the ext PA lines are enabled in BCMA_CC_CHIPCTL. Export the function in bcma which does this for use by b43 and enable the ext PA lines during wireless core initialization. BugLink: http://bugs.launchpad.net/bugs/925577 Cc: Arend van Spriel <arend@xxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Seth Forshee <seth.forshee@xxxxxxxxxxxxx> --- drivers/bcma/driver_chipcommon_pmu.c | 1 + drivers/net/wireless/b43/main.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c index a058842..332d7fb 100644 --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -129,6 +129,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) } bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); } +EXPORT_SYMBOL_GPL(bcma_chipco_bcm4331_ext_pa_lines_ctl); void bcma_pmu_workarounds(struct bcma_drv_cc *cc) { diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 5a39b22..6bac5cf 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4713,6 +4713,13 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_upload_card_macaddress(dev); b43_security_init(dev); +#ifdef CONFIG_B43_BCMA + /* Required for tx to work on BCM4331 */ + if (dev->dev->bus_type == B43_BUS_BCMA && dev->dev->chip_id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&dev->dev->bdev->bus->drv_cc, + true); +#endif + ieee80211_wake_queues(dev->wl->hw); b43_set_status(dev, B43_STAT_INITIALIZED); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
