In order to give the usermode an ability to configure
scan channel times, and as it required for the beacon
reports in the 802.11k standard.
Add to the scan command min/max channel times. Add
min/max passive channel times, since a single scan
can contain both passive and active channels due to
regulatory constraints.
Signed-off-by: Victor Goldenshtein <victorg@xxxxxx>
---
v2:
New NL80211_FEATURE_SCAN_TIMES.
Move the default scan times from mac to cfg.
Handle the default scan times also for wext.
include/linux/nl80211.h | 25 +++++++++++++++++++++++++
include/net/cfg80211.h | 11 +++++++++++
net/wireless/core.h | 1 +
net/wireless/nl80211.c | 27 ++++++++++++++++++++++++++-
net/wireless/scan.c | 33 +++++++++++++++++++++++++++++++++
5 files changed, 96 insertions(+), 1 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2540e86..6bbcdba 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1222,6 +1222,23 @@ enum nl80211_commands {
* @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
* or 0 to disable background scan.
*
+ * @NL80211_ATTR_SCAN_MIN_CH_TIME: Minimum active scan time (in TUs),
+ * u32 attribute to setup minimum time to wait on each channel, if received
+ * at least one probe_resp/beacon during this period will continue waiting
+ * @NL80211_ATTR_SCAN_MAX_CH_TIME, otherwise will move to next channel.
+ * @NL80211_ATTR_SCAN_MAX_CH_TIME: Maximum active scan time (in TUs),
+ * u32 attribute to setup maximum time to wait on the channel.
+ * @NL80211_ATTR_SCAN_PSV_MIN_CH_TIME: Minimum passive scan time (in TUs),
+ * u32 attribute (similar to @NL80211_ATTR_SCAN_MIN_CH_TIME).
+ * @NL80211_ATTR_SCAN_PSV_MAX_CH_TIME: Maximum passive scan time (in TUs),
+ * u32 attribute (similar to @NL80211_ATTR_SCAN_MAX_CH_TIME).
+ * Note:
+ * The above channel time attributes are for the %NL80211_CMD_TRIGGER_SCAN
+ * command. The attributes are optional, the driver will use default
+ * channel time values if the attribute is not set or set to zero.
+ * If one of the min times will be greater than max, -EINVAL will be
+ * returned. For the software scan only the min times are relevant.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1473,6 +1490,11 @@ enum nl80211_attrs {
NL80211_ATTR_BG_SCAN_PERIOD,
+ NL80211_ATTR_SCAN_MIN_CH_TIME,
+ NL80211_ATTR_SCAN_MAX_CH_TIME,
+ NL80211_ATTR_SCAN_PSV_MIN_CH_TIME,
+ NL80211_ATTR_SCAN_PSV_MAX_CH_TIME,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2865,11 +2887,14 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
* @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
* the connected inactive stations in AP mode.
+ * @NL80211_FEATURE_SCAN_TIMES: This driver supports min/max scan times
+ * configuration for the %NL80211_CMD_TRIGGER_SCAN command.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
NL80211_FEATURE_HT_IBSS = 1 << 1,
NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+ NL80211_FEATURE_SCAN_TIMES = 1 << 3,
};
/**
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index adb2320..948cf60 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -920,6 +920,12 @@ struct cfg80211_ssid {
* @dev: the interface
* @aborted: (internal) scan request was notified as aborted
* @no_cck: used to send probe requests at non CCK rate in 2GHz band
+ * @min_ch_time: minimum time to wait on each channel for active scans
+ * @max_ch_time: maximum time to wait on each channel for active scans
+ * @min_passive_ch_time: minimum time to wait on each channel for passive scans
+ * @max_passive_ch_time: maximum time to wait on each channel for passive scans
+ * Note: If the above channel times are not set or set to zero, the default
+ * channel times will be used.
*/
struct cfg80211_scan_request {
struct cfg80211_ssid *ssids;
@@ -936,6 +942,11 @@ struct cfg80211_scan_request {
bool aborted;
bool no_cck;
+ u32 min_ch_time;
+ u32 max_ch_time;
+ u32 min_passive_ch_time;
+ u32 max_passive_ch_time;
+
/* keep last */
struct ieee80211_channel *channels[0];
};
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 3ac2dd0..de0ed36e 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -416,6 +416,7 @@ void cfg80211_sme_scan_done(struct net_device *dev);
void cfg80211_sme_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
void cfg80211_sme_disassoc(struct net_device *dev,
struct cfg80211_internal_bss *bss);
+int cfg80211_trigger_scan(struct cfg80211_registered_device *rdev);
void __cfg80211_scan_done(struct work_struct *wk);
void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak);
void __cfg80211_sched_scan_results(struct work_struct *wk);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 859bd66..d2307ad 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -206,6 +206,10 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_NOACK_MAP] = { .type = NLA_U16 },
[NL80211_ATTR_INACTIVITY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_ATTR_BG_SCAN_PERIOD] = { .type = NLA_U16 },
+ [NL80211_ATTR_SCAN_MIN_CH_TIME] = { .type = NLA_U32 },
+ [NL80211_ATTR_SCAN_MAX_CH_TIME] = { .type = NLA_U32 },
+ [NL80211_ATTR_SCAN_PSV_MIN_CH_TIME] = { .type = NLA_U32 },
+ [NL80211_ATTR_SCAN_PSV_MAX_CH_TIME] = { .type = NLA_U32 },
};
/* policy for the key attributes */
@@ -3884,6 +3888,27 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
request->ie_len);
}
+ if (info->attrs[NL80211_ATTR_SCAN_MIN_CH_TIME]) {
+ request->min_ch_time =
+ nla_get_u32(info->attrs[NL80211_ATTR_SCAN_MIN_CH_TIME]);
+ }
+ if (info->attrs[NL80211_ATTR_SCAN_MAX_CH_TIME]) {
+ request->max_ch_time =
+ nla_get_u32(info->attrs[NL80211_ATTR_SCAN_MAX_CH_TIME]);
+ if (request->min_ch_time > request->max_ch_time)
+ return -EINVAL;
+ }
+ if (info->attrs[NL80211_ATTR_SCAN_PSV_MIN_CH_TIME]) {
+ request->min_passive_ch_time =
+ nla_get_u32(info->attrs[NL80211_ATTR_SCAN_PSV_MIN_CH_TIME]);
+ }
+ if (info->attrs[NL80211_ATTR_SCAN_PSV_MAX_CH_TIME]) {
+ request->max_passive_ch_time =
+ nla_get_u32(info->attrs[NL80211_ATTR_SCAN_PSV_MAX_CH_TIME]);
+ if (request->min_passive_ch_time > request->max_passive_ch_time)
+ return -EINVAL;
+ }
+
for (i = 0; i < IEEE80211_NUM_BANDS; i++)
if (wiphy->bands[i])
request->rates[i] =
@@ -3915,7 +3940,7 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
request->wiphy = &rdev->wiphy;
rdev->scan_req = request;
- err = rdev->ops->scan(&rdev->wiphy, dev, request);
+ err = cfg80211_trigger_scan(rdev);
if (!err) {
nl80211_send_scan_start(rdev, dev);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 9dee87c..03b8b3c 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -19,6 +19,27 @@
#include "wext-compat.h"
#define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ)
+#define IEEE80211_CHANNEL_TIME (HZ / 33)
+#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8)
+
+int cfg80211_trigger_scan(struct cfg80211_registered_device *rdev)
+{
+ struct cfg80211_scan_request *request;
+
+ ASSERT_RDEV_LOCK(rdev);
+
+ request = rdev->scan_req;
+
+ if (!request)
+ return -EINVAL;
+
+ if (!request->min_passive_ch_time)
+ request->min_passive_ch_time = IEEE80211_PASSIVE_CHANNEL_TIME;
+ if (!request->min_ch_time)
+ request->min_ch_time = IEEE80211_CHANNEL_TIME;
+
+ return rdev->ops->scan(&rdev->wiphy, request->dev, request);
+}
void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak)
{
@@ -1023,6 +1044,18 @@ int cfg80211_wext_siwscan(struct net_device *dev,
if (wiphy->bands[i])
creq->rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1;
+ if (wreq->min_channel_time) {
+ creq->min_ch_time = wreq->min_channel_time;
+ if (wreq->scan_type == IW_SCAN_TYPE_ACTIVE)
+ creq->min_passive_ch_time =
+ IEEE80211_PASSIVE_CHANNEL_TIME;
+ else
+ creq->min_passive_ch_time = wreq->min_channel_time;
+ } else {
+ creq->min_ch_time = IEEE80211_CHANNEL_TIME;
+ creq->min_passive_ch_time = IEEE80211_PASSIVE_CHANNEL_TIME;
+ }
+
rdev->scan_req = creq;
err = rdev->ops->scan(wiphy, dev, creq);
if (err) {
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
