This patch introduces a new mesh configuration parameter "ht_opmode" and will
allow user to check the current HT protection mode selected. Users could
configure the protection mode by the command "iw mesh_iface set mesh_param
mesh_ht_protection_mode=2". The default protection mode of mesh is set to
non-HT mixed mode.
Signed-off-by: Ashok Nagarajan <ashok@xxxxxxxxxxx>
Reviewed-by: Thomas Pedersen <thomas@xxxxxxxxxxx>
---
include/linux/nl80211.h | 3 +++
include/net/cfg80211.h | 1 +
net/mac80211/cfg.c | 5 +++++
net/mac80211/mesh.c | 3 +++
net/mac80211/mesh_plink.c | 1 +
net/wireless/mesh.c | 1 +
net/wireless/nl80211.c | 5 +++++
7 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 1335084..2540e86 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2154,6 +2154,8 @@ enum nl80211_mntr_flags {
* @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
* to synchronize to for 11s default synchronization method (see 11C.12.2.2)
*
+ * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
+ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
@@ -2179,6 +2181,7 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_FORWARDING,
NL80211_MESHCONF_RSSI_THRESHOLD,
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
+ NL80211_MESHCONF_HT_OPMODE,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 815dc3f..1c36cb5 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -821,6 +821,7 @@ struct mesh_config {
bool dot11MeshGateAnnouncementProtocol;
bool dot11MeshForwarding;
s32 rssi_threshold;
+ u16 ht_opmode;
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 70b2af2..3532ae0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1364,6 +1364,11 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
return -ENOTSUPP;
conf->rssi_threshold = nconf->rssi_threshold;
}
+ if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) {
+ conf->ht_opmode = nconf->ht_opmode;
+ sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+ }
return 0;
}
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d25cb78..98faac6 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -595,12 +595,15 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
ieee80211_mesh_root_setup(ifmsh);
ieee80211_queue_work(&local->hw, &sdata->work);
+ sdata->vif.bss_conf.ht_operation_mode =
+ ifmsh->mshcfg.ht_opmode;
sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
sdata->vif.bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_HT |
BSS_CHANGED_BASIC_RATES |
BSS_CHANGED_BEACON_INT);
}
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 8007f9c..b293006 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -160,6 +160,7 @@ out:
if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
+ sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
changed = BSS_CHANGED_HT;
mpl_dbg("mesh_plink %pM: protection mode changed to %d",
sdata->vif.addr, ht_opmode);
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 8c747fa..2749cb8 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -61,6 +61,7 @@ const struct mesh_config default_mesh_config = {
.dot11MeshGateAnnouncementProtocol = false,
.dot11MeshForwarding = true,
.rssi_threshold = MESH_RSSI_THRESHOLD,
+ .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
};
const struct mesh_setup default_mesh_setup = {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 140c1d2..859bd66 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3335,6 +3335,8 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
cur_params.dot11MeshForwarding);
NLA_PUT_U32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
cur_params.rssi_threshold);
+ NLA_PUT_U32(msg, NL80211_MESHCONF_HT_OPMODE,
+ cur_params.ht_opmode);
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
@@ -3369,6 +3371,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
+ [NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
};
static const struct nla_policy
@@ -3466,6 +3469,8 @@ do {\
mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
+ mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
if (mask_out)
*mask_out = mask;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
